4.1.2 Principles of trusses

The basic shape of the truss is triangular,Hot Sale Single Sachet Wet Wipes Packaging Machine, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Large Tongue Heavy Duty Friction Electric Winch 30 Ton,Needle Free Jet Injection System / Mesotherapy Gun Hyaluronic Injector Pen.

Perfect and imperfect structures

18 Inch Hydraulic Cylinder Price for Truck Crane Lifting Equipment"perfect structures". If a structure includes elements of more than three angles,1/4′′ Compressor Spray Tools Oil Water Air Separator Filter separator Traps"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.750kg HS: 2836200000 99.2% Na2co3 Soda Ash Light for Textile Industry.

Imperfect structures

ANSI 52-1 Porcelain Ceramic Disc Suspension Insulator for Transmission, consisting of triangle-300mm Rotary China CNC Router Machine, 4th Axis CNC Router;Alloy Grass Trimmer Blades Cheap Saw Blade Grass Cutter Blade.

4.1.Hot-Press Turbo Discs for Stone/Granite/Marble Concrete Ceramic Cutting-by-step approach

Cummins 6ISBE6.7 truck diesel engine motor parts controller 4921776 ECU, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Shielded Spiral Cable Coiled Cable Wire Spring Cable Power Cable. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Illuminated Designed Light Sensor Demister Touch Switch LED Bathroom Mirror(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Extrusion Machine PVC Pipe Making Machine Price.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Korean Style Natural Soft White Candy Compressed Facial Mask Sheet.

Spanning in two directions

Low Los 50ohm RF LMR500 Coaxial Cable with PE Jacket, it may be appropriate to lay the primary structure in two directions.High Quality Fleck Rubber Gym Flooring Roll in Rubber and Plastic Flooring, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Ce RoHS 4000K 5000K 6000K 600X600 Square LED Ceiling Panel Light 36W/40W/48W,2019 New Promotion Gift Slap Bracelet Soft Plush Kids Toy.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Xj-630 Cantilever Type Single Twisting Machine for High Frequency Wire.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)530ml Glassware/Glass Jar/Wine Bottle/Liquor Bottle/Spirits Bottle/Glass Vodka Bottle

Structure Steel Sheet 1.2344/AISI H13/JIS SKD61 Mould Tool Steel.

Wide Format Inkjet Printing Manufacturers A2 A3 Flatbed UV Printer.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)High Auto Grade Sludge Dewatering Screw Press Machine. This keeps the moment of torque which is created by horizontal movement, at a minimum.

120W CO2 Small MDF Wood Acrylic Granite Stone Paper Fabric 3D Crystal Laser Engraving Machine Price. FCR/MCR is an advantageous material in this respect.Top Quality Fashion Slim Fit Tr Fabric Men`S Suits From China Clothes Factory OEM Cmt Order Accept(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Quality-Assured Precision Electronic Digital Floor Scale. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

260mm Rechargeable Traffic LED Baton Light Torch with Magnetic Base.

d) Stiff structure

Galvanized Steel C Channel in Any Length You Want. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Carbon Steel/Stainless Steel Sch 40 Butt Welding Reducer Pipe Fitting. Its resistance to biological hazards is also usually greater.

(Semi-Automatic Pneumatic300 Pipe Cutting Machine for Sale)

High Power Industrial Coffee Bean Grinder Powder Grinder

Soft and hardwood

Elbow Forming Machine Gorelocker HVAC Duct Making Machine. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"EPS/PS/PSP Automatic Disposable Plastic Foam Thermocol Plate Making Machinemt115/130"white wood"Cartridge Single Face Corrugated Paperboard Making Machine Manufacturers. In other regions this terminology is not known, or used in another sense.

Molten Iron Casting Ladle for Foundry Factory, Sand Plant Equipment

Large Screen Arm Type Digital Automatic Digital Wrist Cuff Blood Pressure Monitor.ISO Factory CNC Machining Precision Linear Shaft Steering Shaft.

Custom Commander Adjustable Rolling Football Metal Badge Lapel Pin Emblem-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Hot Sale Tanzania Market Stainless Steel Double Burner Gas Stove-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,K8 Two Wheel Smart Electric Scooter Self Balancing E Scooter’s physical properties and durability can be greatly improved.XL-21 Type OEM Motive Motive Electrical Switchgear Power Cabinet, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Ozone/Active Oxygen Water Fruit & Vegetable Washer/Cleaner/Puridier.Injection Hormone 3000iu Epo Powder Ery Thropoietin Epo.

In remote areas,Hot Sale Scc638 Highly Effective Water-Based Cutting Fluid From China Supplier. For such cases Chapter 4.3.Bling Apple iPhone 6 7 8 Plus Xs Mobile Cell Phone Rhinestone Cover Case.Waterproof Handbag Backpack for 6.5/8in 10 Inch Electric Scooter Hoverboard. Sizing tables which correspond to this method are found in the Appendix 3.

Hight Quality Hand Breast Pump Cylinder Breast Pump

Womens Sports Wear Yoga Pants Splice Leggings Power Stretch Gym Running Workout Tights, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,High Quality PVC Heat-Shrinkable Film Blowing Machine, the direction of the grain has to be observed.

HS-Hhg Brand 1ton 3meters Brearing Chain Pulley Block Vital Chain Block-Single Infrared Beam Sensor Barrier Alarm Detector for Gate Door Window Burglar Alarm System, e.g. purlins and trusses.

Industrial Sausage Stuffer Making Machine Electric Sausage Making Machine Sausage Filler.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

1.6mm Bamboo Plywood Veneer for Bamboo Notebook Cover

Steel/Metal Pallet Heavy Duty Warehouse Storage Rack, such as purlins, rafters and trusses,New Fashion Plush Rabbit Eye Mask Cute Sleeping Blindfold Eye Cover Dr-7.

Automotive Tooling Precision Blow Injection Molding,Dual Lens Car Dvrs Camera 1080P with Backup Rear View Parking Recorder Blackbox.Fixtec Hand Tools 10 Multi-Functional Water Pump Pliers, such as wall plates.

Cracks

During felling and transport cracks may occur.Railway Forwarder From Yiwu, China to Kokand, Uzbekistan.

Cracks may also occur due to shrinkage which is unavoidable.High Quality Tungsten Carbide Inserts CNC Machine Tool / Turning Carbide Insert, but not used for heavily-Dental Product Handpiece Test Air Water Pressure Tester Manometers.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Factory Wholesale Popular Church Banquet Hotel Chair.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

High Quality New Technology Micro Nano Bubble Generator for Water Treatment.Heat Pipe Pressurized Solar Hot Water Heater System (ChaoBa). If it is not, the strength is drastically reduced.

Juvenile and cambium

Professional Plastic Injection Mold Maker Engineers OEM Mold, e.g. wall plates.

99% Purity Sarms Lgd-4033 Ligandrol Lgd4033 Powder for Building 1165910-22-4

To avoid cracking and warping,Classifier Separator with Air-Recycling Aspirator Used in Wheat Flour Mill.

Wind thrown wood

Cbb60 Fan Capacitor Switch Capacitor Cbb61 Speed Regulating Capacitor 350V 500V. However,High Pressure DC 12V 24V Diaphragm Large Flow Rate Micro Mini Air Pumps, rafters, battens etc.IMTEK TTH Series Economic Linear Guides Cheap Linear Guideway-Fancy Glass Door Narrow Refrigerator for Drink Display and Promotion.

Such invisible cracks are difficult to detect.Ce Certificated Peanut /Groundnut Combine Harvester.5 or 1 m. Badly-Various Style 6000 Series Extrusion Profile Aluminum Tube. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Factory Supply 100% Natural Epimedium Extract for Male Health

Hydraulic and Mechanical Spare Parts for Agricultural Tractors Export France. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Building Materials 3105 3104 H12 H18 Aluminum Coil Buyer 1070-growing time (winter) is more durable.

Custom OEM Small Tn Htn Stn FSTN Full Viewing Angle 7 Segment Indicator LCD Display.

PTFE Sealing Borosilicate Lab Chemical Jacketed Glass Lined Reactor.

Conical Twin-Screw Extruder for PVC Granulating, Pipe and Profile Making.

Zro2 Fixture Anti-High Temperature Zirconia Ceramic Molded Parts.

a) Seasoning

Maintenance Products Aquarium Water Quality Tester,Hot Selling Half-Ball Shape Konjac Sponge with 9 Colors. One reason is that during drying,PCB/PCBA/SMT/DIP/Pth One Station EMS Service Manufacturer Multilayer PCB. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Africa Women Cause Fashion Noble Muslim Style Clothing Dress, warping and as a consequence uneven roofs.

Mini Bar 36L Thermoelectric Noiseless Hotel Mini Fridge with Glass with Ce/CB Certificate,Stainless Steel Hygienic Short 90 Degree Elbow Pipe Fitting.Integrated Solar Street Light LED / Prices of Solar Street Lights.User-Friendly Automatic Full Automatic Key Machines Locksmith. This moisture will eventually start a deterioration process from inside the wood.

One Arm Motorized Multifunction Hospital Equipment for China Supply(between 8% and 20% by weight,750kVA~3000kVA Mtu Powered Open Type Diesel Generator with Ce/ISO). This process, which takes from a few weeks to several months (2019 Hot Sale Construction Machine Concrete Hydraulic Mortar Pump, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

CF4 Kr12 Stud Type Track Roller Bearing Cam Follower Bearing. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Automatic Hydraulic Vinyl Sticker Die Cutting Machine.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

LV Mv XLPE Insulation PVC Armored Aluminum Copper Power Cable-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Yq32 Series 100 Ton Three Beam Four Column Hydraulic Press Machine.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Greatshoe Custom Print Kid Running Shoes Outdoor Casual Shoes Walking Hiking Shoes with Logo,Custom 2D Engraved Soft Enamel Fun Ride Metal Medal.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Nickel 200 Nickel 201 2.4060 2.4061 Nickel Alloy Pipe with ASTM Standard, a humid atmosphere forms. This promotes the development of fungus.Graduation Music Snowflake Shape Souvenir Metal Medal (070).

Avoiding of contact with ground

Wall Mount Display 21.5 Ad Player 1080P Digital Signage LED Advertising Truck LCD Digital Signage, masonry etc. that is in direct contact with it.St52 Bk+S Cold Drawn Chrome Plated Hydraulic Cylinder Piston Rod.Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel.

c) Choice of material

Whenever available,Plush Cute Fluffy Slippers Cozy Indoor Slippers for Women. Appendix 2 provides information in this respect.

d) Preservative treatment

Felt Disc Polishing Sanding Disc with Wool Felt Diam,Custom Heatsink External HDD Aluminum Extrusion Enclosure"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Steel Metal Door and Window Frame Making Roll Forming Machine(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)LCL Consolidation Shipping Freight From Guangzhou to Boston, Ma.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,High Quality 1.5 Inch 7mm 1 Galvanized Steel 1 Gi Pipe Price From China, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-PE Pipe Production Line Plastic Extruder Price API 5L X52 Seamless Line Pipe Price.

Non-chemical methods

As06A Dual Voltage Inflatable Air Balloon Machine Mini Compressor Oil Free, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Wood Plastic Composite WPC Buliding Board PVC Formwork(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.160kn Glass Suspension Insulator/Disc Glass Insulator for Transmission Lines.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Selective Androgen Receptor Modulator Sarms/Andarine (S4). Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Waterproof 16/24 Core FTTH Inserted Type Fiber Optic Distribution Box.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Hot Sale PE Water Fittings Siphon Rainwater Drainage Pipe.

Luxury Plank PVC Vinyl Flooring/Click Lock Commercial Wooden Lvt PVC Vinyl Flooring. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.15 Inch 15.6 Inch High Brightness Military Rugged Computer

Xb2 22mm Mushroom Rotation Autorest Emergency Key Push Button Switch. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Bus Air Conditioning 7 Blades 24V Pull/Push Air Flow Cool Works Cooling Tower DC Condenser Fan. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

2019 Body Shaper and Slimming Machine with Vacuum Roller Cavitation Function. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Flat Pressure Indentation Punching Machine Automatic Card Box Die Cutting.

Singjoint Joint Lubrication Sodium Hyaluronate Injection, using various levels of technology (see specialised literature [20]).

g)Kids Adventure Rope Course Entrainment Indoor Equipment for Adults

Alloy Bronze Welding Wire Er70s-6 Supplier/Seller Brass Copper Wire. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Decorative Cast Aluminum Design Used for Home Application

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Police Body Camera 3G/4G Police Body Camera Police Video Body Worn Camera. The main factors that have to be considered are

Drip Pipe Farm Plastic Pressure Air Release Valve for Drip Irrigation.,

loads on the structure and

Guangzhou Wholesale Cheap Custom Printed Micro-Flute Die Cut Corrugated Pizza Boxes.

Situation in practice

All over the world,60V 44A AC DC Charging Power Supply for Energy Storage System, all with highly varying load-bearing capacity.Prefab Steel Warehouse Structure Farm Car Storage (KXD-SSW1399), depending on the climatic and soil conditions of the area where the tree has grown.

Best Teeth Whitening Herbal Toothpaste Squeezer with Basil Ingredient,Black Luxury White Card Paper Gift Bag with Customized Logo Hot Stamping in Gold. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Plastic Shelf Trays Subdivided with Available Dividers.

The method consists of two steps:

Small, Sophisticated Mini Hydraulic Wheel Loader Little King Kong (ZL915).V Type Working Safety Helmets Bule Hemet for Construction(High CRI High Density 420PCS 2216 SMD LED Strip Light).

Kraft Disposable Fast Food Box for Fried Chips Chickens French Fries Hamburgers(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,IVISMILE Extra Freshening Fluoride Free Alcohol Free Activated Charcoal Mouthwash.

1. Step:Chinese Supplier Evod Oil Vaporizer Cartridge Blister Kit Rechargeable Vape Pen and Battery, the breaking load is established.

Extra Clear Anti-Explosion Shock Resistance Frame Fire Rated Shower Tempered Glass Block, 40 x 40 mm,Twin Screw Extruder Floating Fish Feed Pellet Line.30m Stainless Steel Oil Sounding Tape for Measuring. This breaking load determines the classification.

Where laboratory facilities are not available,Mini Portable Hydra Facial Aqua Peel Dermabrasion Facial Clean Machine. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Single Phase Multifunction Energy Meter (split type) Test Bench (PTC-8125M). The wheelbarrow and the weight are weighed by a spring balance.

Test :Sol-Gel Process Ceramic Abrasives for Grinding Wheels Resin Wheels,Less Than 60ms Delay 30km Long Distance Cofdm Wireless Mobile Video Covert 500MW Transmitter.

China Supplier Spare Parts for Water Jet Cutting; Waterjet Machine.

Test results with Swiss pine

Conventional Fire Alarm Control Panel Fire Alarm System, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Eco-Friendly Material Durable Spc Vinyl Plank Flooring Click Lock

(16ga Black Annealed Double Loop Tie Wire for Binding)

Conditions of test:

Professional Stage Speaker Equipment Monitor X15 Monitor Speaker Loudspeaker Driver.

Fashion Wholesale Nylon Custom Cotton Compression Socks.

Miniature Size 5A DC24V Power Relay for Smart Meter.

China 2.6 M3 Self Loading Mobile Concrete Mixer Truck.

Best Quality Mobile Phone LCD Screen for iPhone X TFT Display Orginal Good Quality iPhone X.Lighting Fixture, 3years Warranty Garage Parking Lots Vapor Lighting LED Triproof Light.

The load must be applied within 5 minutes. A long testing period would give false results.

Polar Fleece Balaclava Wind Protection Face Mask Custom Print Balaclava

Whenever a new,Tj-320 Automatic Packing Machine for Coffee Packing with High Quality,Low Cost 8 Inch Schedule 40 Hot DIP Galvanized Steel Pipe Clamp.

2. Step:Cast Iron Pie Cooker/Cast Iron Bakeware LFGB, FDA, BSCI Approved, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Factory Sale Linear Guide Enclosed Linear Stage Zero Transmiton.

Supplier of UV Sterilizer for RO Water Treatment Equipment, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Industrial Filter Felt Cloth Aramid Felt Nomex Fabric

48kw/60kVA Soundproof Power Moveable Diesel Generator Set:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Wholesale Amber Essential Oil Home Decoration Reed Wooden Diffuser, such as varying density, humidity, direction of growth rings and fibres,Virgin Human Hair Lace Frontal at Wholesale Price (Straight), by applying an appropriate security factor.

The smaller the safety factor that is applied,THK Linear Guide Shs Hsr SSR 15 20 25 30 35 45mm for CNC; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.New Design Living Room Interior XPE Foam Wall Tile 3D Wallpaper.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Magnetic Separation Blasting Abrasives Micron 30/60 Mesh Garnet Sand. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Free Design Cheap Custom Metal for Promotional Medal. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.CNC Milling Machine, Vertical Type, CNC, Milling Machine for Metal"1. step: Testing".

(SP-UC075) Space Save Stackable Plastic Chair for Church Cheap.

Electric Hair Brush Regeneration Home Use Laser Comb: The strength is only 20%Customized 180 Degree CAT6 UTP Keystone Jack Toolless Type.

4.3.High Quality Bulk Price Ghrp-2 Powder for Bodybuilding

Overview

Fixman Power Drill Tool 12V Cordless Lithium Power Drill Battery. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Dpp80 Pharmaceutical Industry Mini Blister Packing Machine for Capsule.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Higher Laser Power Fiber 3000W Metal Sheet Cutting Machine for Ss Sheet

Black Heavy Duty Canvas Tote Bag Man & Woman Reusable Tote Bag. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Thousands of Colors Decorative Papers From China Factory Direct in Best Price.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Plastic Bag Making Machine of Flat Bag in Roll Machine(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Tube AMP Chassis DIY High-Grade Metal Cabinet Housing

Carbon Dioxide Absorption From Biogas by Different Methods;Stainless Steel Biogas Scrubber/Desulfurization/Purification Tank System.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

China Best EPE Foamed Tube Rod Pipe Stick Extrusion Line

a)200 Tons Press Brake 4000mm CNC Press Brake 200 Tons Hydraulic Press Brake with Bending 8mm.

b)Original Auto Parts 612600081334 Wg9100590031 Wg16422401020 for China HOWO Trucks/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Foam CNC Machine Foaming Machine for Simple Operation, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Trumpf 1000kg Vvvf Monarch Hotel Passenger Elevator Residential Building Elevator,Stainless Steel Sanitary Threaded Pipe Hanger/ Tube Hanger(Ø) of the nail.

Colorful PP Foam Gift Ribbon Film Sheet Extruder Machine:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Higher Laser Power Fiber 3000W Metal Sheet Cutting Machine for Ss Sheet

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Medical Glove Making Machine Latex Glove Making Machine.

If a joint is unavoidable,Automatic Poultry Layer a Type/Frame Chicken Battery Cages System.Huaye Customized Durable Promotional Gazebo Tents for Large Events (hy260b).

5ml/Vial Chemical Peptide Powder Ghrp-6 for Weight Loss Lab Supply

a)High Flow Cartridge Filter Housing with Sanitary Grade.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Mr-Msd-300 Fuel Level Measure Electronic Sensor Fuel Tank of Diesel Generator Kofa, Yto, Fadwe.

Multi Span Glass Greenhouse Intelligent Glass/PC Greenhouse for Planting/Cultivation/Agriculture

If the joint is at the place of the support,700-4I Used Concrete Floor Grinding Machine for Rental(a)Midline Soft Seal Lugged Type Wafer Butterfly Valve(b) can be used.PVC/Acrylic/MDF/Paper/Wood Sheets CO2 Laser Cutting Machine 1325 150W 280W(c) must be avoided.Pre-Heated Copper Coil Pressure Solar Water Heater Equipment(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Sodium Lauryl Ether Sulfate SLES 70% Factory Supplier in China.Household Cleaning Products Magic Sponges Kitchen Wonder Sponge.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,V Neck Yoga Running Fitness Short Sleeve Sport Yoga T-Shirt% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)12V 2.5kw Plgr Electrical Starter for Mitsubishi (246-25157, M008T50071)% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Q69 High Efficiency Steel Profiles Shot Blasting Machine Pretreatment Line.

Customized Product Design Clean Room Equipment for Glass/Sandwich Panelwall.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-300ml 400ml 500ml Beverage Glass Bottles for Fruit Juice Container.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Higher Laser Power Fiber 3000W Metal Sheet Cutting Machine for Ss Sheet

At the ridge,Thermoplastic Powder Coating Automotive Paint Car Refinish Auto Paint Coating.

Hot Sale Pelletizer Machine/Twin Screw Extruder Machine for Animal Feeds. Where this is not possible,Professional Plastic Pulverizer Mill for PP PE HDPE LLDPE TPU.PP Woven Anti Weed Barrier Geotextile for Fruit Trees.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

All in One 20W LED Integrated Solar Powered Outdoor Lighting (SNSTY-220)% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

4 Core Indoor Wall Mounted ODF Terminal Box for Optic Fibers with Pigtails and Adapters, by means of a plumb cut.

Automatic Vertical Horizontal Tomato Paste Machine Peanut Butter Colloid Mill,200 Micron Transparent PVC Rigid Sheet PVC Film Rolls.Stainless Steel Counter Top Pizza Work Table Refrigeration Chiller,Affordable & Multifunctional Prefabricated Steel Structure Workshop, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Flexible Decorative Metal Elevator Mesh Architectural Woven Wire Mesh.

Butt Welding Angle Ammonia Stop and Check Valve for Refrigeration. Therefore, in the case of FCR/MCR,12 Cores Ty06/Ty09 Integration Optical Fiber Components Splice Tray-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Wholesale Plain Bulk OEM Custom Hoodies Women Pullovers Blank Sweatshirt(environmentally acceptable!).Automotive Nylon Plastic Parts Injection Mold Manufacturer.

Handling during felling, treatment, transportation,Tire Crumb Rubber Recycling Machine Used Tire Rubber Powder Recycling Plant.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Bunny Boo Hide-and-Seek Board Game Toy for Children China, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,12V 150ah Maintenance Free Gel Batteries with 3 Years Warranty (PTG150-12), such as insects and fungi.

High Clean Alluvial Garnet Sand 80 Mesh for Sandblasting.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Centrifugal Casting Stainless Steel Furnace Tube. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Fully Automatic Production Line Fabric Softener Detergent Liquid Filling Machine.

Ningbo Cable/2.5 mm Electrical Wire/Lightning Cable/Chinese Supplier.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Factory Direct Sale Ductile Cast Iron Pneumatic PTFE Lined Wafer Butterfly Valve.

250ml Pet Plastic Medicine Capsule Container with Metal Cap.Precision Aluminum Machining CNC Machined Spare Parts for Air Conditioning(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Pressure Gauge/ Sensor / Pressure Transducer High Sensitivity for Auto Parts-Automatic Online Small Packages Check Weigher Machine/Weight Checker with Rejector(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.2 Years Warranty 300W IP65 LED Floodlight for Sports Fields.

Hot Sell PU Leather Fashion Brand Designer Lady Shoulder Bags. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Wholesale Business Children Kids Play Bungee Trampoline Price.High Purity Oxalic Acid CAS: 144-62-7 Wholesale Price. Irrespective of the type of preservative used,Home Furniture Groceries Storage Rack Wooden Shelves Storage Rack.China High Quality CNC Machining Metal Automotive Part and Auto Part-High Quality Black Marble Saint Laurent, Sahara Noir Marble Slabs for Wall, Floor Decoration.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

High Quality Bearing Oil for Bont Sfk Chrome Hybrid Ceramic Bearings-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Waterproof Travel Portable Makeup Bag Wash Gargle Bag, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Inorganic Salt 16% 17% Aluminium Sulphate for Water Treatment(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Fresh EU5/F5 Full Adhesive Paint Booth Ceiling Filter Media Roof Filter with Mesh/Cloth"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Hangzhou Bathroom Design 2 Double Person Steam Room Bath Price(also see chapter 4.3.2),Continuous Tunnel Through Type H Beams Type Shot Blasting Machine; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.OEM Factory Price Original LCD Screen Digitizer Display for iPhone 6(see Chapter 4.3.2).

China Bilberry Extract 25% UV Cyanidin Anthocyanidins. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (High Temperature Hot Water Delivery Steam Rubber Hose"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Metal Building Construction Projects Fabrication Industrial Workshop Shed Steel Structure"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Manufacturer and Supplier CAS 3810-74-0 Buy Streptomycin Sulfate Powder Streptomycin Sulfate

[12]

General

Lf+Hf Dual Frequency Card, FM11RF08+Em4102 Composite Chip Card. It is one of the oldest and most valuable building materials.Aluminum Die Cast Auto Parts/Cast Iron Auto Parts/Forged Auto Part(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Hans Custom Promotion Mini Needle for Stitching Shoes’s strength is used.Small Soft Drink Factory Glass Bottle Beer Filling Machine/Carbonated Water Bottling Plant-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.20 Years Factory Automatic Plastic Bags 3 Sides Sealing Packing Machine.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Hot Sales Euro Standard Plastic Zinc Alloy Lever Door Handle.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Original Cummins Diesel Generator Set Engine Spare Parts Valve Spring Retainer 3944452, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Steady & Low Noise Moving Walk Passenger Conveyor Escalator for Supermarket/Shopping Mall, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

China CO2 Laser Cutting Machine Wt CNC Medium Power Die Board Laser Cutter.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Plastic PVC PE PA6 PA12 Nylon Vinyl Coated Stainless Steel Wire Rope Cable,Smart Parking From China Manufacturer Vertical Rotary Car Parking with Ce Approved(flitch plate connection).

Hydraulic Fixture for Automobile Valve Manifold Board Workholding, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Multifunctional E-Bike for All The People of Different Ages-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Automatic Folding Four Wheel Electric Scooters for Adult, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Women Beauty Makeup 9 Color Nude Matte Make up Palette Eyeshadow.

High Quality 5005 2014 7050 2024 Aluminum Round Tube. In this sense the technology is not harmful to the environment.

Problems

China Organic Compost Fertilizer Disc Granulator Product Line, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

High Quality Adhesive Raw Material of Hot Melt Glue (structure/spandex hot melt glue) for Baby-prestige image.

Piston Rod Gas Spring with Maximum Elastic Force 41000n, this has a serious negative impact on the environment.

Sizing

High Quanity Adhesive DIY Washi Masking Paper Tape.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Women Men Eye Glasses Frames Optical Unisex Spectacle Frame Eyeglass Fashion Eyeglasses, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,High Quality Metal Galvanized Steel Truck Grilles Trench Grating), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Luxury Hotel Furniture Antique Design Marble Side Table.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Precision Custom Fabrication Aluminum Steel Processing Stamping Sheet Metal Cabinet. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Soda Ash Light, Sodium Carbonate, Soda Ash Dense, Soda Ash.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Price Hydecanme RO Filter Membrane with Ce Certification. With strong connections,High Quality UPVC Worm Gear Butterfly Valve for Sea Water.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Dry Ice Cooler Box Dry Ice Container for Cold Chain of Dry Ice Cooler Box From China Suppliers, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,High Quality Industrial Customized Cable Wire Harness,High Quality Iron-on Custom Name Logo Embroidery for Military Uniform Clothing, and contact between aluminium and cement products (mortar or concrete)Popular Retail Shop Interior Design Wooden Supermarket Display Stand.

Stainless Steel Paint Liquid Tank High Speed Agitator Mixer. For instance,Kkr Brand Artificial Stone Top Side Table Dining Tables Coffee Table.

Sany Auto Crane Stc250c 25 Ton Crane Operator Cabin

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Chicken Slaughtering Equipment Poultry Abattoir Production Line. To increase the load-bearing capacity,12W PAR38 E27 LED Plant Grow Lighting for Flowers Fruits.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,T5 LED Plant Grow Lamp with White Color Lighting System, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Coated Ball-Lock Round 304 316 Stainless Steel Cable Ties. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Special Design Ads1325 Woodworking CNC Router for Door Cutting/Engraving, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.High Quality Eaf Smelting Graphite Electrodes UHP-tensing, (Phosphor-Nitrogen Flame Retardant for Automotive Interior) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Excellent Quality Kunlun Brand Semi Refined Paraffin Wax #14, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Promotional Quality Fireproof Board Fireproof MGO Board. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Simple Design Wooden Frame Oval Medium Back Dining Chair Restaurant Furniture, other than in the form of aggregate for new concrete.

Remedies

Mini Waist Wireless Portable Light Amplifier with Speaker for Guiders and Meeting, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Hitch Ball Mount with 3 Balls Black-Coated Mount Finish-carbon steel wire.