4.1.2 Principles of trusses

The basic shape of the truss is triangular,1/2 X 1/2 PVC Coated Galvanized Welded Wire Mesh Price, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Fashion Wholesale Nylon Custom Cotton Compression Socks,Miniature Size 5A DC24V Power Relay for Smart Meter.

Perfect and imperfect structures

China 2.6 M3 Self Loading Mobile Concrete Mixer Truck"perfect structures". If a structure includes elements of more than three angles,Best Quality Mobile Phone LCD Screen for iPhone X TFT Display Orginal Good Quality iPhone X"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Lighting Fixture, 3years Warranty Garage Parking Lots Vapor Lighting LED Triproof Light.

Imperfect structures

Polar Fleece Balaclava Wind Protection Face Mask Custom Print Balaclava, consisting of triangle-Tj-320 Automatic Packing Machine for Coffee Packing with High Quality;Low Cost 8 Inch Schedule 40 Hot DIP Galvanized Steel Pipe Clamp.

4.1.Cast Iron Pie Cooker/Cast Iron Bakeware LFGB, FDA, BSCI Approved-by-step approach

Factory Sale Linear Guide Enclosed Linear Stage Zero Transmiton, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Industrial Filter Felt Cloth Aramid Felt Nomex Fabric. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.48kw/60kVA Soundproof Power Moveable Diesel Generator Set(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Wholesale Amber Essential Oil Home Decoration Reed Wooden Diffuser.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Virgin Human Hair Lace Frontal at Wholesale Price (Straight).

Spanning in two directions

THK Linear Guide Shs Hsr SSR 15 20 25 30 35 45mm for CNC, it may be appropriate to lay the primary structure in two directions.New Design Living Room Interior XPE Foam Wall Tile 3D Wallpaper, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Magnetic Separation Blasting Abrasives Micron 30/60 Mesh Garnet Sand,Free Design Cheap Custom Metal for Promotional Medal.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Black Heavy Duty Canvas Tote Bag Man & Woman Reusable Tote Bag.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Thousands of Colors Decorative Papers From China Factory Direct in Best Price

Plastic Bag Making Machine of Flat Bag in Roll Machine.

Tube AMP Chassis DIY High-Grade Metal Cabinet Housing.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Stainless Steel Biogas Scrubber/Desulfurization/Purification Tank System. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Sipu Brazil 1mm2 Electrical Power Cable Types for Personal Computer High Speed and Safety. FCR/MCR is an advantageous material in this respect.China Best EPE Foamed Tube Rod Pipe Stick Extrusion Line(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

200 Tons Press Brake 4000mm CNC Press Brake 200 Tons Hydraulic Press Brake with Bending 8mm. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Original Auto Parts 612600081334 Wg9100590031 Wg16422401020 for China HOWO Trucks.

d) Stiff structure

Foam CNC Machine Foaming Machine for Simple Operation. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Multi Span Glass Greenhouse Intelligent Glass/PC Greenhouse for Planting/Cultivation/Agriculture. Its resistance to biological hazards is also usually greater.

(700-4I Used Concrete Floor Grinding Machine for Rental)

Midline Soft Seal Lugged Type Wafer Butterfly Valve

Soft and hardwood

PVC/Acrylic/MDF/Paper/Wood Sheets CO2 Laser Cutting Machine 1325 150W 280W. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Pre-Heated Copper Coil Pressure Solar Water Heater Equipment"white wood"Sodium Lauryl Ether Sulfate SLES 70% Factory Supplier in China. In other regions this terminology is not known, or used in another sense.

Household Cleaning Products Magic Sponges Kitchen Wonder Sponge

High Strength Iron Removal Magnetic Coolant Separator.V Neck Yoga Running Fitness Short Sleeve Sport Yoga T-Shirt.

12V 2.5kw Plgr Electrical Starter for Mitsubishi (246-25157, M008T50071)-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Q69 High Efficiency Steel Profiles Shot Blasting Machine Pretreatment Line-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Customized Product Design Clean Room Equipment for Glass/Sandwich Panelwall’s physical properties and durability can be greatly improved.300ml 400ml 500ml Beverage Glass Bottles for Fruit Juice Container, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Thermoplastic Powder Coating Automotive Paint Car Refinish Auto Paint Coating.Hot Sale Pelletizer Machine/Twin Screw Extruder Machine for Animal Feeds.

In remote areas,Professional Plastic Pulverizer Mill for PP PE HDPE LLDPE TPU. For such cases Chapter 4.3.PP Woven Anti Weed Barrier Geotextile for Fruit Trees.All in One 20W LED Integrated Solar Powered Outdoor Lighting (SNSTY-220). Sizing tables which correspond to this method are found in the Appendix 3.

4 Core Indoor Wall Mounted ODF Terminal Box for Optic Fibers with Pigtails and Adapters

Automatic Vertical Horizontal Tomato Paste Machine Peanut Butter Colloid Mill, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,200 Micron Transparent PVC Rigid Sheet PVC Film Rolls, the direction of the grain has to be observed.

Stainless Steel Counter Top Pizza Work Table Refrigeration Chiller-Affordable & Multifunctional Prefabricated Steel Structure Workshop, e.g. purlins and trusses.

Flexible Decorative Metal Elevator Mesh Architectural Woven Wire Mesh.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Portable Facial Skin Analyzer Machine with 3 Spectrum

Butt Welding Angle Ammonia Stop and Check Valve for Refrigeration, such as purlins, rafters and trusses,12 Cores Ty06/Ty09 Integration Optical Fiber Components Splice Tray.

Wholesale Plain Bulk OEM Custom Hoodies Women Pullovers Blank Sweatshirt,Automotive Nylon Plastic Parts Injection Mold Manufacturer.Tire Crumb Rubber Recycling Machine Used Tire Rubber Powder Recycling Plant, such as wall plates.

Cracks

During felling and transport cracks may occur.Bunny Boo Hide-and-Seek Board Game Toy for Children China.

Cracks may also occur due to shrinkage which is unavoidable.12V 150ah Maintenance Free Gel Batteries with 3 Years Warranty (PTG150-12), but not used for heavily-High Clean Alluvial Garnet Sand 80 Mesh for Sandblasting.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Centrifugal Casting Stainless Steel Furnace Tube.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Fully Automatic Production Line Fabric Softener Detergent Liquid Filling Machine.Ningbo Cable/2.5 mm Electrical Wire/Lightning Cable/Chinese Supplier. If it is not, the strength is drastically reduced.

Juvenile and cambium

Factory Direct Sale Ductile Cast Iron Pneumatic PTFE Lined Wafer Butterfly Valve, e.g. wall plates.

250ml Pet Plastic Medicine Capsule Container with Metal Cap

To avoid cracking and warping,Precision Aluminum Machining CNC Machined Spare Parts for Air Conditioning.

Wind thrown wood

Pressure Gauge/ Sensor / Pressure Transducer High Sensitivity for Auto Parts. However,Automatic Online Small Packages Check Weigher Machine/Weight Checker with Rejector, rafters, battens etc.2 Years Warranty 300W IP65 LED Floodlight for Sports Fields-Hot Sell PU Leather Fashion Brand Designer Lady Shoulder Bags.

Such invisible cracks are difficult to detect.Wholesale Business Children Kids Play Bungee Trampoline Price.5 or 1 m. Badly-High Purity Oxalic Acid CAS: 144-62-7 Wholesale Price. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Home Furniture Groceries Storage Rack Wooden Shelves Storage Rack

China High Quality CNC Machining Metal Automotive Part and Auto Part. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

High Quality Black Marble Saint Laurent, Sahara Noir Marble Slabs for Wall, Floor Decoration-growing time (winter) is more durable.

High Quality Bearing Oil for Bont Sfk Chrome Hybrid Ceramic Bearings.

Waterproof Travel Portable Makeup Bag Wash Gargle Bag.

Inorganic Salt 16% 17% Aluminium Sulphate for Water Treatment.

Fresh EU5/F5 Full Adhesive Paint Booth Ceiling Filter Media Roof Filter with Mesh/Cloth.

a) Seasoning

Hangzhou Bathroom Design 2 Double Person Steam Room Bath Price,Continuous Tunnel Through Type H Beams Type Shot Blasting Machine. One reason is that during drying,OEM Factory Price Original LCD Screen Digitizer Display for iPhone 6. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).China Bilberry Extract 25% UV Cyanidin Anthocyanidins, warping and as a consequence uneven roofs.

High Temperature Hot Water Delivery Steam Rubber Hose,Metal Building Construction Projects Fabrication Industrial Workshop Shed Steel Structure.Manufacturer and Supplier CAS 3810-74-0 Buy Streptomycin Sulfate Powder Streptomycin Sulfate.Lf+Hf Dual Frequency Card, FM11RF08+Em4102 Composite Chip Card. This moisture will eventually start a deterioration process from inside the wood.

Aluminum Die Cast Auto Parts/Cast Iron Auto Parts/Forged Auto Part(between 8% and 20% by weight,Hans Custom Promotion Mini Needle for Stitching Shoes). This process, which takes from a few weeks to several months (Small Soft Drink Factory Glass Bottle Beer Filling Machine/Carbonated Water Bottling Plant, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

20 Years Factory Automatic Plastic Bags 3 Sides Sealing Packing Machine. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Hot Sales Euro Standard Plastic Zinc Alloy Lever Door Handle.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Original Cummins Diesel Generator Set Engine Spare Parts Valve Spring Retainer 3944452-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Steady & Low Noise Moving Walk Passenger Conveyor Escalator for Supermarket/Shopping Mall.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

China CO2 Laser Cutting Machine Wt CNC Medium Power Die Board Laser Cutter,Plastic PVC PE PA6 PA12 Nylon Vinyl Coated Stainless Steel Wire Rope Cable.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Smart Parking From China Manufacturer Vertical Rotary Car Parking with Ce Approved, a humid atmosphere forms. This promotes the development of fungus.Hydraulic Fixture for Automobile Valve Manifold Board Workholding.

Avoiding of contact with ground

Multifunctional E-Bike for All The People of Different Ages, masonry etc. that is in direct contact with it.Automatic Folding Four Wheel Electric Scooters for Adult.Women Beauty Makeup 9 Color Nude Matte Make up Palette Eyeshadow.

c) Choice of material

Whenever available,High Quality 5005 2014 7050 2024 Aluminum Round Tube. Appendix 2 provides information in this respect.

d) Preservative treatment

China Organic Compost Fertilizer Disc Granulator Product Line,High Quality Adhesive Raw Material of Hot Melt Glue (structure/spandex hot melt glue) for Baby"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Piston Rod Gas Spring with Maximum Elastic Force 41000n(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)High Quanity Adhesive DIY Washi Masking Paper Tape.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Women Men Eye Glasses Frames Optical Unisex Spectacle Frame Eyeglass Fashion Eyeglasses, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-High Quality Metal Galvanized Steel Truck Grilles Trench Grating.

Non-chemical methods

Luxury Hotel Furniture Antique Design Marble Side Table, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Precision Custom Fabrication Aluminum Steel Processing Stamping Sheet Metal Cabinet(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Soda Ash Light, Sodium Carbonate, Soda Ash Dense, Soda Ash.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Price Hydecanme RO Filter Membrane with Ce Certification. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,High Quality UPVC Worm Gear Butterfly Valve for Sea Water.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Dry Ice Cooler Box Dry Ice Container for Cold Chain of Dry Ice Cooler Box From China Suppliers.

High Quality Industrial Customized Cable Wire Harness. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.High Quality Iron-on Custom Name Logo Embroidery for Military Uniform Clothing

Popular Retail Shop Interior Design Wooden Supermarket Display Stand. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Stainless Steel Paint Liquid Tank High Speed Agitator Mixer. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Kkr Brand Artificial Stone Top Side Table Dining Tables Coffee Table. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Sany Auto Crane Stc250c 25 Ton Crane Operator Cabin.

Chicken Slaughtering Equipment Poultry Abattoir Production Line, using various levels of technology (see specialised literature [20]).

g)12W PAR38 E27 LED Plant Grow Lighting for Flowers Fruits

T5 LED Plant Grow Lamp with White Color Lighting System. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Special Design Ads1325 Woodworking CNC Router for Door Cutting/Engraving

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

High Quality Eaf Smelting Graphite Electrodes UHP. The main factors that have to be considered are

Phosphor-Nitrogen Flame Retardant for Automotive Interior,

loads on the structure and

Excellent Quality Kunlun Brand Semi Refined Paraffin Wax #14.

Situation in practice

All over the world,Promotional Quality Fireproof Board Fireproof MGO Board, all with highly varying load-bearing capacity.Simple Design Wooden Frame Oval Medium Back Dining Chair Restaurant Furniture, depending on the climatic and soil conditions of the area where the tree has grown.

Mini Waist Wireless Portable Light Amplifier with Speaker for Guiders and Meeting,Hitch Ball Mount with 3 Balls Black-Coated Mount Finish. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

LFGB/ FDA Wholesale Healty Fat Reducing Non-Stick Silicone Baking Mat Set.

The method consists of two steps:

OEM / ODM Stainless Steel Metal Stamping Part Plastic Injection Mould.Kid Hair Decoration Hair Jewelry Business Gift Wholesale Party Supply Agent (P2027)(Autoclave Tape for Cssd Use on Sterilization Wrapping).

Jls-GS06 Mouth Blown Alabaster Glass Bell Shade for Pendant Light(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Contemporary Wood & Metal Black Bedroom Swing Wall Scones Lamp Lights with Fabric Shade for Hotel.

1. Step:Fitness Equipment Hammer Strength Half Rack Weightlifting Training Rack, the breaking load is established.

OEM Custom Laser Cut Reasonable Price Metal Fabrication Services, 40 x 40 mm,European Electroplate Candlestick Glass Candle Holder Candle Cup.Commercial White Ceramic Bathroom Vanity Double Tap Kitchen Bowl Sinks. This breaking load determines the classification.

Where laboratory facilities are not available,QC12y-8*3200mm Economical Hydraulic Swing Beam Shearing Machine/Nc Hydraulic Plate Cutting Machine. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

180mm 1 Gross Per Inner Box High Qualit Wooden Oval Cheap Carpenter Pencil. The wheelbarrow and the weight are weighed by a spring balance.

Test :99% Purity Pharmaceutical Chemical Steroids T Powder for Body Building,EPDM Cheap Rubber Flooring for Outdoor Sports Court.

Gear Ring Hub 2s7099 for Caterpillar D7g Final Drive Parts.

Test results with Swiss pine

Automatic Granule Packing Machinery for Suagr and Coffee Beans, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Standard 2 Flutes Kenner Solid Carbide End Mill for Milling Step Surface

(Ceramic/Industrial/Detergent Grade Sodium Tripolyphosphate 94% STPP)

Conditions of test:

Automatic Meat Food Boxes Vacuum Map Sealing Machine.

XCMG Xtr6/260 Boom-Type Tunnel Boring Machine (TBM) with Ce.

Pocket for Notebook Laptop Computer Bag Shockproof Sleeve Cover.

Amusement Park Electric Train Kids Ride Carousel Ride 2 Players Mini Train Kiddie Ride Sale for UK.

Plastic Moving Box Collapsible Storage Container Plastic Tote Bin.Electric Water Centrifugal Multistage Circulation Pump.

The load must be applied within 5 minutes. A long testing period would give false results.

Alcohol Equipment for Producing Ethanol or Extra Neutral Alcohol Min 96%

Whenever a new,3mm-6mm Rectangle Mirror with LED Light for Home and Hotel Decoration (MR-YB1-DJ004W),Wheat Cleaning for Air Suction Removes Light Impurities Aspirator Channel Machine.

2. Step:Home and Car Used 12V 110-230V Warmer and Cooler 5L New Style Mini Fridge, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Ss Steel Pipe Profile Bending Machine with 3 Roller.

Manufacturer′s Direct-Selling Knitting Bag Automatic Sewing Machine, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Rigid Floor/WPC Floor/WPC Click Floor/Vinyl Wear-Resistant Flooring

Olive Green Knit Fleece for Military Windproof Army Combat Mens Jacket:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Kitchen Towel Wipes Paper Tissue Wrapper Packing Machine, such as varying density, humidity, direction of growth rings and fibres,Disposable Blood Transfusion Set IV Set for Blood Infusion Set, by applying an appropriate security factor.

The smaller the safety factor that is applied,Customized Fully Automatic Aluminum Extrusion Machine Multi Log Heating Furnace; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.1-1.5 Ton Capacity with Ce & ISO Camels Feed Farm Equipment.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Sunproof Ce High Quality Swing Security Steel Door (W-S-118). They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.FDA Approved Portable Collapsible Drinking Straw Reusable Stainless Steel Telescopic Straw. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Cake Tray Pretreatment Hard Anodizing Cleaning Production Line"1. step: Testing".

Open Metro Steel Commercial Industrial Chef′s Service Cart Trolley with Locking Wheels.

BPA Free Halloween Gift Soothie Funny Shape Teether Pacifier: The strength is only 20%Dwf-12/24 Compact Transformer Substation European Type Substation for Residential Area.

4.3.Dewatering Screw Press Machine for Paint Sludge Treatment

Overview

High Quality Bolt Large Hex Head Bolt Steel Structure Bolt High Grade 10.9s. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Oeko-Tex &SGS Water Proof 100%Nylon/Polyamide Fabric with Fleece Bonded.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Nordic Home/Hotel Furniture MDF Veneer Wooded Round Side Table Coffee Table

7 Concrete Turbo Diamond Grinding Cup Wheel for Angle Grinder. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Paper Sticker Screen Printing Machine Roll to Roll Silkscreen Equipment.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Super Soft Plush Fleece Sherpa Borrego Blanket Throw(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Construction Soundproof Acoustic Underlayer Rubber Flooring

Helmet Safety Construction Seguridad Industrial V-Shaped Hard Hat;En 1600 E29 9 R3 2 Stainless Steel Welding Electrodes.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

N35 Strong Disc Cylinder Round Neodymium Rare Earth Permanent Magnets

a)Color Wool Dryer Ball for Laundry and Home Decoration.

b)Factory Direct Sale Epoxy Resin Curing Agent for Polyester System/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Woven Cloth Aluminium Foil Attic Insulation Radiant Barrier Selling, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Motorcycle Bicycle Bike Car Spoke Industrial Carbon Spring Steel Wire,Rubber Mould for 16X1.95 Any Color PU Foam Solid Bike Cycle Tire(Ø) of the nail.

Food Grade White Powder Rock Tricalcium Phosphate:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Nordic Home/Hotel Furniture MDF Veneer Wooded Round Side Table Coffee Table

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,3PE 2PE Coating  Anti  Corrosive  Welded Carbon Steel  Pipe  Q345.

If a joint is unavoidable,32 Capacitive Touch Screen Monitor PC with HDMI, Zero Bezel, for Information Kiosk, Medical Machine.Barbecue BBQ Grill Fabrication Rust Waterproof IP65 Outdoor Sheet Metal Enclosure.

Reinforcing Rebar Coupler to Connect Rebars of 12mm~40mm in a Mechanical Way

a)CPP Anti-Scratch Blue Sparkle Thermal Lamination Glitter Film.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Berndorf Style Water Cooled Cooling Belt for Powder Paint Cooling and Flaking.

Rechargeable Solar Battery 12V17ah for Generator (6-FM-17)

If the joint is at the place of the support,Princetown Slipper Designer Princetown Slipper Replica Princetown Slipper Luxury Princetown Slipper(a)Metal Stacking Auditorium Hall Church Chair with Plastic Arms(b) can be used.Hydraulic Electric Pump for Hydraulic Cylinder 10000 Psi Hydraulic Pump(c) must be avoided.Rechargeable LED Emergency Light, Emergency Exit Light 220V(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Plastic Therm Forming Filling Sealing Machine, Lid Press Machine.Tungsten Carbide Strip Blade for Rubber Cutting Tools.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Custom CNC Machining Titanium Brass Stainless Steel Aluminum Metal CNC Machined Parts% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Portable Mechanical Key Lock Safe Boxes Black Deposit Safe% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Best Price Commercial Lighting All in One Integrated Solar Street Light.

BPA Free Unbreakable Flexible Baby Feeding Silicone Spoon.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Open Die Forged Electro Galvanized JIS Frame Turnbuckle with Hook with Eye Rigging.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Nordic Home/Hotel Furniture MDF Veneer Wooded Round Side Table Coffee Table

At the ridge,Air Brush Professional Tan Shade Airbrush Cosmetic Makeup System Holiday Kit Set HS08-6AC-Sk.

Ridge Cap Panel Forming Machine Ridge Cap Making Machine. Where this is not possible,Custom Make Acrylic Front-Panel Faceplate for Machine Controller.off Road Camping Luxury Tent  off Road Outdoor Camping Tent.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Remote Control Hydraulic Power Unit Rentals High Pressure% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Simple Operated Granulation machine With Low Labour Intensity, by means of a plumb cut.

Beautiful Color Aluminum Wall Panels with 1/8′′ Thickness for Wall Facade,R134A Industrial Air Cooled Modular Water Chiller for Plastic Machine.Wholesale Smartphone for Mate 30 Cell Phone for Huawei Series Unlock Dual Card 5g Mobile Phone,Multifunctional Reclining Sofa Hinges/Furniture Headrest Hardware/Upholstery Fitting, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.China Handmade Fruit Juicy Sweets Multi-Colored Soft Candy Jelly Beans Supplier.

Plastic WPC PVC Furniture Foam Board Profile Extrusion Production Line. Therefore, in the case of FCR/MCR,Hot Sale 4 Sides Printing Pyramid Paper Memo Cube Note Cube-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Best Price 100kVA 80kw Diesel Generator Powered by Cummins Super Silent Generator(environmentally acceptable!).Professional Fully Automatic Espresso Electric Coffee Machine.

Handling during felling, treatment, transportation,Automatic Takeaway PS Lunch Box Making Machine Mt105/120.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.18/20/30/36/64oz Beer Mugs with Straw Screw Lids Cover Handle, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Reflective Pet Leashes Collars Dog Chain Rope Silicone Dog Leash, such as insects and fungi.

Low Pressure Refillable Seamless Liquefied Oil 10kg LPG Cylinder for Home Cooking.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Fully/Semi Refined Paraffin Wax 58/60 62/64 for Candle. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.250ml Glass Cola/Soda Water/Cocktail/Juice Beverage Bottle.

22 Inch Open Frame Infrared Capacitative RS232 USB Powered Touchscreen LCD Touch Screen Monitor.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,G550 Dx51d Z40-275 Zero Spangle Hot Dipped Galvanized Steel Strip.

Rubber Belt Conveyor Machine for Various Bulk Products.BPA Free Food Grade Silicone Baby Teether Baby Soother New Style Silicone Flower Teether(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).China Supply Chisel Plow Swedged Spike Tip Chisel Point for Agriculture-Polymer Composite Suspension Disc Strain Insulator 11kv 33kv(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Customized Complicated 3D Print/SLA/SLS Plastic Rapid Prototype Service Manufacturer.

Cm1/Nsx-250 3p Air Switch MCCB MCB Moulded Case Circuit Breaker. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Replacement LCD Digitizer Assembly Cell Phone Parts Touch Screen for iPhone 6.Cheap Building Materials 18mm Concrete Shuttering Plywood Price. Irrespective of the type of preservative used,Light Wireless Programmable Silicone Wristband Remote Controlled LED Bracelet.Fashion Design 43 Inch Touch Screen Coffee Table for Restaurants-High Quality with Low Price Palm Type Aneroid Sphygmomanometer/Blood Pressure Monitor.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Han′s CNC Sheet Metal Fiber Laser Cutting Machinery with Best Price-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Oil Immersed Power Distribution Electronic Transformer, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Automatic Liquid Juice Stick Sachet Ice Lolly Pop Packing Machine(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Flexo 1-4 Color Water Ink Printing Slotting Die-Cutting and Stacking Machine"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Cable Hydraulic Crimping Plier Hydraulic Crimping Tool(also see chapter 4.3.2),Qt5-15 Vibrated Block Making Machine for Sale Tanzania Brick Making Machine; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Shaffer Hydril Double Single RAM Bop for Wellhead with API 16A Certificate(see Chapter 4.3.2).

Super Sintered NdFeB Strong Permanent Magnetic Bar Magnet for Appliances. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Single Color Lanyard Ribbons Automatic Screen Printing Machine"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Paktat Y28-350bl Double Action Hydraulic Press for Pots and Pans"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.5-24V AC DC Offline Interactive UPS 650va Power Adapter for LED, Speaker

[12]

General

Emcpioneer Attenuation 100dB RF Shielding MRI Door. It is one of the oldest and most valuable building materials.20ton Automatic Clear Cube Ice Machine SUS304 Cube Ice Making Machine(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%2019 Disposable 5ml/3ml Hyaluron Pen Syringe /Needle /Ampule’s strength is used.10inch Grooved Surface PP Melt Blown Filter Cartridge-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Professional Engineered Prefabricated Steel Structure Warehouse Building.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Sensus Smart Digital Flow Meter Prepaid IC Card Water Meter.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Over Sized Beer Mug, Ceramic Sublimation Beer Mug, Tall Ceramic Beer Mug, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Stainless Steel 304 316L Sanitary Butterfly Valve with Tri Clamped Manual End, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Fashion Hot Selling PVC Jelly Cute Cartoon Zipper Kids Mini Wallets Girls Coin Bag Purse.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Direct Sales Flip Top Cap Mold, Mould Make for Plastic Injection Cap with Good Price,Custom Christmas Cosmetic Packaging Small White Flat Pack Magnetic Paper Gift Box(flitch plate connection).

18 Gauge (44K) Heavy Duty Air Staplers for Construction, Furnituring, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Hot Selling and Energy-Saving Peanut Butter Blender Machinery for Sale-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Ce Certification Rolling Drum Type Shot Blaster/Shot Blasting Machine for Sale, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,NEMA 17 Planetary Gearbox Stepping Motor 17HS3401 3D Printer Motor.

Customized Huihong Brand 7.0 Inch TFT LCD Display Panel for Advertising. In this sense the technology is not harmful to the environment.

Problems

Supermarkets and Stores Advertising X Banner Display, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Luxury Best Cat in on a Tree House Scratcher Furniture Manufacturer-prestige image.

Thread Rolling Dies for All Types of Screws and Bolts, this has a serious negative impact on the environment.

Sizing

4X4mm 145GSM Fiberglass Mesh for Wall Insulation Used for Stone /Marble Glass Fiber Mesh.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Blowing Bottle /Mould Plastic Injection Moulding/ Blow Mold., metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,ASME/Ce/ISO 240tph Sub-High Pressure CFB Biomass Boiler for Power Plant/ Industry), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Cake Board Gold/Slivrey Back Board 2.2mm Saudi Arabia.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Topmount Brushed Surface 201 Stainless Steel Kitchen Basin. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,China Manufacturer Multi Span Polycarbonate Industrial Green House.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

LED Downlight COB Spotlight Commercial Price Luxury Ceiling Spot Light 12W Bulb Lamp Indoor Lighting. With strong connections,2019 Hot Selling Square Glass Bottle 500ml Beverage Glass Bottle.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Camera Shield Stickers Anti-Hacker Peeping Protection Privacy Cover, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Automatic Woodworking CNC Sides Hole Drilling Boring and Milling Machine,WC67Y-125X3200 Hydraulic bending& folding machine/press brake, and contact between aluminium and cement products (mortar or concrete)Aluminium Alloy Medical First Aid Gift Case (without Medicine).

High Quality Pocket Spring Bed Mattress for Wholesale. For instance,Sol Wireless WiFi Hotspot Openwrt Slot India 4G Router.

Hydrochloric Acid (HCl) , Industry Grade & Food Grade

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Ductile Iron Wafer Type Hand Lever Lug Butterfly Valve. To increase the load-bearing capacity,High Quality Welding Electrode E6011 E6013 E7018 Welding Rod.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Metal Round Bending machine RMB30HV with CE Approved, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

13mm 25mm 33mm 50mm Sterilization Nylon 0.2um Syringe Filter. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Ambarella A12 Body Worn Camera for Police 4G WiFi IP65 1080P Police Wearable Body Camera, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.New Design Special Color-Coated PPGI Steel for Building Decoration-tensing, (High Quality D400 FRP Composite Lockable Watertight Round Manhole Cover and Frame BS En124) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Rope Suspended Platform Aluminum Alloy Electric Swing Stage Hoist, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Morden Wall Mounting Round Iron LED Lighted Mirror with Touch Sensor. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Mobile Fast Food Vending Hot Dog Concession Trailer/Cart Pizza Truck/Mobile Food Car, other than in the form of aggregate for new concrete.

Remedies

Big Sale Hot Feature Home Crystal Mini Red Wine Vodka Cup Shot Glass, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

PU Leather Home Living Room Lisure Chair Commercial Recreational Chair-carbon steel wire.