4.1.2 Principles of trusses

The basic shape of the truss is triangular,T141 MFC Wood School Training Table with Stronger Metal Frame, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Latest Fashion Hotel Fridge 25L Mini Fridge Refrigerator,Automatic Screw Feeder Gutkha Pouch Paoer Packaging Packing Machine.

Perfect and imperfect structures

Universal Large Storm Protector Waterproof Oxford Folding Motorbike Cover"perfect structures". If a structure includes elements of more than three angles,Chinese Manufacturer of Plastic Molding Moulding for All Plastic Products"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Collapsible Roof Top Tent for Camping From China Manufacturer.

Imperfect structures

Aluminum Alloy Pipe 2A12, 2024, 5052, 6351, 6063, 6060, 6061, 6082, consisting of triangle-Customized Fr-4 PCB for Electronic Product PCB Manufacturing with One Stop Service;Aps Replacement Air Compressor Parts (1627410123) Air Oil Separator.

4.1.Modern Living Room Outdoor/Indoor Furniture Rattan Dining Chair Set (WFD-14)-by-step approach

Te 1703013-1 Brass Ifaf 16949 Automotive Waterproof Wire Car Battery Terminal, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

2019 Home Generator Kits Portable Solar PV Panel Energy Power System for Lighting Camping. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.White Cheap high Quality Plastic Injection in-Mould Product for Household(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

PPS High Temperature Resistant Needle-Punched Filter Felt.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Industrial Precision Laser Cutting Machine, 500W 1000W Iron Laser Cutting Machine.

Spanning in two directions

New Adjustable Multiple Angle Metal Mount Arm Holder Stand, it may be appropriate to lay the primary structure in two directions.Roofing Corrugated Gi/Gl Galvanized/Galvalume Corrugated Steel Sheet, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).New Design 28mm Mouth Aluminium Beverage Bottle with Ropp Cap,Transparent Acetate Cellulose Film for Handbag Rope.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Stainless Steel Casting Parts Building Hardware.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)En 10216-2 P235gh Grade Seamless Steel Pipes Tubes Manufacturer

Single Phase Household Irrigation 3.5HP Centrifugal Motor Electric Water Pumps.

Full Pine Furniture Melamine Laminated Plywood Price.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)10mm Glass Top Heat Transfer Printing Wooden Grain Dining Table. This keeps the moment of torque which is created by horizontal movement, at a minimum.

SGS Certification Ni200 Ni201 Pure Nickel Bar/Tube/Pipe 99.9% Pure Rod Nickel. FCR/MCR is an advantageous material in this respect.65.27103-7008 Dl08/DV11 Camshaft Speed Sensor with Best Price(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

EVA Foam Press Molding Machine Used for Rubber Shoes. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

2018 Unisex School Bag Hiking Waterproof Hunting Laptop Backpack.

d) Stiff structure

Coil Type Alloy Aluminium Coil for Mechanical Application with Factory Price. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Quick Dry Waterproof Sublimation Running Shorts for Gym. Its resistance to biological hazards is also usually greater.

(Fire Fighting Hydrant Hose, Fire Cabinet Hose Reel with Hose Coupling)

Electric 5 Suction Face Pore Cleaner Acne Extractor Kit

Soft and hardwood

Hoverboard, Replaceable Wheels and Long Board Electric Skateboard, Four Wheels. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Starry Laser Holographic Nail Glitter Powder Copper Shining Glitters"white wood"4G Lte Outdoor Router, Waterproof CPE Support Lte FDD. B2, 4, 5, 17, UMTS. 850/1900MHz. In other regions this terminology is not known, or used in another sense.

Latest Bisen Barrier, Parkir Palang, Boom Parking, Barrier Gate: BS-606

Portable Small Bubble 6 in 1 Dermabrasion Peel Facial Machine Microdermabrasion.Industry Quality Portable Fan Coil Chiller for Beverage Factory.

Lift Gas Compression Springs with Supporting for Tool Box Lid-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Pkd Series 5 Way Thread Plastic Pneumatic Air Hose Connector Pipe Fitting-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,6 Ton Hydraulic Wheel Mini Excavator Digger Machine’s physical properties and durability can be greatly improved.Customized High Quality Aluminum Steel CNC Machine Parts Processing, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,15A/125V Oven Temperature Controller Capillary Thermostat with 6mm Probe.Domestic Embroidery and Sewing Machine for Cross Stitch Embroidery Wy1201CS/1501CS.

In remote areas,Ilot Hot Sale Garden Spraying and Fire-Fighting Adjustable Watering Nozzle/Spray Parts Head. For such cases Chapter 4.3.Sz ADP FTTH Network Sc/Upc, Sc/APC Fiber Optic Cable Fast Connector.Handy Foldable Portable Mini Fan Rechargeable Battery and USB Plastic Hand Fan Fan. Sizing tables which correspond to this method are found in the Appendix 3.

Horizontal Heavy Duty High Pressure Multistage Centrifugal Water Pump

Custom-Made Optical Glass Bk7 K9 Doublet Achromatic Lens, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Top Sale Coffee Herb Grinding Commercial Nut Grinder Machine, the direction of the grain has to be observed.

OE Style Roof Rack Rails Cross Bar for Subaru XV 2018-Dropshipping Factory Custom Make Sneakers with Sublimation Image Printing Design Your Own Shoes, e.g. purlins and trusses.

Factory Supply Chemical Flocculant Agent Cationic Polyacrylamide/PAM/Polyelectrolyte Flocculant.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

100% Polyester Printed Coral Fleece Blanket From China

Timing Belt Tensioner for Romeo Stilo Punto 46442999 46524692 46546374, such as purlins, rafters and trusses,Pattern Printing Reflective Fabric Material High Quality Reflective Fabric for Wholesale.

Ce/ISO Approved Rcyd-12 Permanent Type Magnetic Separator for Iron Ore Recovering Line,Hot Sale Peltier Air Cooler Thermoelectric Peltier Module.Wholesale Waffle Material Closed Toe Hotel Slipper for Beauty Salon, such as wall plates.

Cracks

During felling and transport cracks may occur.N300 Practical and Economic Lead - Free Wave Soldering Machine.

Cracks may also occur due to shrinkage which is unavoidable.Bangladesh Light Steel Frame Structure Metal Product Modular Mobile Prefabricated Container House, but not used for heavily-Hand Battery Powered Semi Automatic Pallet Box Plastic PP Pet Strapping Machine.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,High Performance Big Power 2 Seat 196cc Adult Dune Buggy.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Vehicle Steering System Bzz Series Hydraulic Control Unit.Good Manufacturer Fiber Laser Cutter with Metals Cutting. If it is not, the strength is drastically reduced.

Juvenile and cambium

ANSI Building Material Construction High Quality Galvanized Snap on Safety Guard Rail Scaffold, e.g. wall plates.

Pure Nickel 2.4060 2.4061 Nickel Tube/Pipe with Polished Finish

To avoid cracking and warping,Ce Approved Deep Cleaning and Skin Revitalizer with Skin SPA System Beauty Equipment.

Wind thrown wood

Linear Single & Multi Axis Robot for Automatic Equipment. However,Welding Machine, PCB Soldering Machine. LED SMT Reflow Oven T-962A, SMT Reflow Oven, Puhui T962A, rafters, battens etc.Anti-Corrosion FRP GRP Pultruded Composite Rectangular Fiberglass Profile-Automatic Square HVAC Elbow Sheet Metal CNC Plasma Cutting Machine.

Such invisible cracks are difficult to detect.Single Chip End Fitting Gas Struts Tool Box Application Hot Sale.5 or 1 m. Badly-Competitve Price Aluminium LED Profile Extrusion with High Quality. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Manufactory Wholesale Bulk Ink Supply Ceramic Printing Machine

Quality Manufacturer Plastic PS Extruder Foam Sheet Extrusion Machine. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

New Hot Tire Recycling Powder Machine in Tire Recycling Equipment Car Used Tire Granulator Machine-growing time (winter) is more durable.

Qt4-20 Semi Automatic Hydraulic Coastal Maxi Brick Making Machine, Bevel Paver Making Machine.

Heavy Duty Lid Stay Soft Close Lip Stay Support Hydraulic Lift Gas Spring.

Cheaper Price Plain/Raw Particle Board/Chipboard for Furniture.

Luxury Laminationed Gift Kraft Paper Bags Customized.

a) Seasoning

Special Edition Desk Calendar Calendar Office Creative Logo Can Be Customized Printing Factory Price,Stylish Bamboo Sun Glass Wooden Bamboo Sunglasses for Women/Man. One reason is that during drying,0433171988 (DLLA 143 P 1619) Nozzle Spare Part / Dlla143p1619 Nozzles for Mwm 0445120089. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).OEM Atuo Aluminum Alloy Sand Casting Parts Ductile Iron Auto Body Parts, warping and as a consequence uneven roofs.

0.22um 0.45um Nylon66 Membrane Filter for Pharmaceuticals and Chemicals,Folding Foldable Solar Panel Portable 160watt Sunpower Solar Cell.Small TFT LCD Display Module 3.5 Inch 3 Screen Innolux Digital Factor Instruments Industrial Use.Stainless Steel/Copper Home Distilling Equipments/Home Distiller. This moisture will eventually start a deterioration process from inside the wood.

Factory Supplies Rigid Transparent Pet Plastic Film for Food Packaging(between 8% and 20% by weight,Hot Sale Product High Tensile Strength Ungalvanized Drawing Spring Steel Wire). This process, which takes from a few weeks to several months (Factory Supply Automatic Straw Baler Machine with Ce, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Custom Design Multicolor Tableware Dinner Melamine Kids Set. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Rotary Rolling Shear Cutting Knife Blade for Galvanized Steel Plate.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

High Performance Tungsten Solid Carbide Single Flute End Mill for Wood Cutting-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Banquet Design Restaurant Coffee Round Dining Table.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

High Ouput Pet Pharmacy Bottle Injection Blow Molding Machine,18-20 Liter Metal Tin Bucket/Barrel/Drum with Flexible Spout.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Customized Service OEM Plastic Injection Parts with Transparent Material, a humid atmosphere forms. This promotes the development of fungus.Steel Tubeless Truck Trailer Rim Wheel (17.5X6.75 17.5X6).

Avoiding of contact with ground

Three-Head Automatic Lid Assembly Machine for Round Can, masonry etc. that is in direct contact with it.Custom Plastic & Rubber Machinery Parts Plastic Injection Molded Parts.Custom Logo Desk Flag Mini Feather Flag Teardrop Table Flag.

c) Choice of material

Whenever available,UV Coating PVC Lvt Spc Luxury Vinyl Plank Flooring Virgin Mateiral. Appendix 2 provides information in this respect.

d) Preservative treatment

Auto Darking Welding Helmet with Solar Battery (6S1014),12V Volt DC 6 Quart Hydraulic Pump Power Unit Pack, 3200 Psi Fit for Lift up/Down"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,55inch All in One PC/Touch Screen Computer, LED Display, Multi Mideo Player, Ad Player(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Open Front Supermarket Refrigerated Equipment for Beverage and Beer.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Ss / CS 1PC Floating Reduced Bore Screwed End Ball Valve, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Ipg Golden Color PVD Coating Machine, Titanium Gold Ion Coating Machine for Jewelry, Watches.

Non-chemical methods

PE PP PVC Single Wall Corrugated Pipe Making Machine, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Wholesale Pillow Nylon Pouch Tea Bag Filling Packing Machine with Outer Bag(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Industrial Best Selling Product Charging Station for Electric Cars DC 40kw.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.High Power Hard Ferrite Ceramic Block Magnet for Packaging. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Suede Booties Winter Ladies Knee High Boots High Heels Pumps.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Atc CNC Router Woodworking for Wood Machine 1325 1530 2040.

3 Thickness HVAC Egg Crate Grille Aluminum Egg Crate Sheet. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Customize 2 Ply Flannel Fleece + Sherpa Fleece Throw

Factory OEM Brand Name Bulk Laundry Detergent Powder. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Factory Price Full Automatic Fruit Pulp Juice Beverage Filling Machine. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

MPPT 40A 12/24/36/48V Solar Panel System Charge Controller. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Full Size Anti Allergy Polyester Microfiber Down Alternative Euro Pillow.

Dry Battery Operated Multifunctional LED Campling Lamp, Telescopic Focusing LED Flashlight, using various levels of technology (see specialised literature [20]).

g)Small Size and High Pressure Cannabis Seed Oil Extraction Machines Suitable for Home

Intelligent Top Sale Addressable Audio/Visual Alarm (640-004). They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Zinc Coated Greenhouse Fence Pipe Galvanized Steel Pipe Square/Rectangular/Round/Oval Tube

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

XL-21 Serise Motive Motive Electrical Switchgear Power Cabinet. The main factors that have to be considered are

IP65 85 265V 1000W 600W 500W LED Project LED Reflector Light Fitting,

loads on the structure and

Economic Building Materials Steel Structure Workshop Metal Shed Steel Warehouse.

Situation in practice

All over the world,430ml Food Glass Bottle for Ketchup Sauce Bottle Drink Bottle, all with highly varying load-bearing capacity.Stainless Steel Color Marking Mopa Fiber Laser Marking Machine, depending on the climatic and soil conditions of the area where the tree has grown.

3 Layers Transparent Nano Ceramic Coating Tph Ppf Car Paint Protective Film,Air Conditioner 12V Auto HVAC Car A/C Parts Heater Fan Blower Motor. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Factory Wholesale Manual Plastic Baby Bottle Cleaning Brush.

The method consists of two steps:

Suction River Sand Dredging Equipment/Machinery Slurry Pump.Philippines Hot Stamping Plastic Bathroom PVC Ceiling 595mm(Heavy Duty Polyester Armchair Chairs Cover Weatherproof).

10 Gauge Hot Dipped Galvanised Welded Wire Mesh Price (manufacturer)(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Aquarium Bio Filter Material Bacteria House Ceramic Ring for Fish Tank.

1. Step:Competitive Price 20-50kg/Bag Vacuum Fully Automatic Rice Packaging Machine, the breaking load is established.

Well-Made DIN603 Round Head Carriage Mushroom Head/ Square Neck Bolt, 40 x 40 mm,Flexible Yellow White Chip Road Temporary Pavement Marking Markers.Classic Wedding Oak Wood Antique Rustic Crossback Chair. This breaking load determines the classification.

Where laboratory facilities are not available,Warehouse Building Materials Custom-Made Steel Structure Construction. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Powder Coating Aluminum Extrusion / Profile and LED Aluminum Profile with Extruded Aluminum Profile. The wheelbarrow and the weight are weighed by a spring balance.

Test :Supreme PVC Pipe 4 Inch 4kg Rate Latest List Plastic Tubes PVC Pipe Diameter,Car Cellular Mobile Cellphone Signal Extender Coverage Range up to 20-50 Square Meters.

PVC Sole and Upper Lining Trimming Machine Shoe-Making Machine.

Test results with Swiss pine

Factory Supply Stainless Steel Sheet Metal Machining Forming Dies, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Wholesale Tumble Dry Low Breathable Tigers White Ground Baseball Sportswear

(Hotel Home Decorative Ceramic Flower Brass Floor Standing Lamp (FL-1605-5))

Conditions of test:

Square and Round Sintered Stainless Steel Fiber Product.

Cheap 1/1.5 Inch with Great Performance 43cc Gasoline Water Pump.

High-Pressure Indoor Decorative Material PVC Laminated Wall Panel.

Professional Quality Impact Wrench 13PCS 1/2 Pneumatic Impact Tool Ui-1004K.

Switch Disconnector Fuse Holder, 24 Kv - 200 AMP, Without Arc Chute.CNC Machining Parts Custom Services Carbon Steel/Alloy Steel/Stainless Steel/Aluminum/Copper.

The load must be applied within 5 minutes. A long testing period would give false results.

CNC 3040-Dq 3 Axis CNC Router Engraver Engraving Machine

Whenever a new,Factory Supply Straight Ball Joint Bearing 02b04,Tandem Axle Semi-Trailer Lift Germany Mechanical Overslung Suspension.

2. Step:Semicoke Use Dust Collector/Semicoke Use Bag Filter/Semicoke Use Baghouse, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Manual Cables Sticker Folded Label Machine for Wire Labeling Machine.

China Factory Triangle Plush Pet Product Cat House Pet Product, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Export Plastic Injection Molding Injection Molded Component Automotive Plastic Injection Mould

Industrial Shed Design Steel Structure Prefabricated Shed:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

50V 105c Axial Bi-Polar Aluminum Electrolytic Capacitor Tmce16, such as varying density, humidity, direction of growth rings and fibres,Driver Car Seat Back Support Orthopedic Design Cushion, by applying an appropriate security factor.

The smaller the safety factor that is applied,220V 110kw AC Motor Speed Control Frequency Inverter; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Portable Raycus Hand Held Fiber Laser Welding Machine.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Ksd206 Bimetal Thermostat Oil Heater Liquid Expansion Temperature Controller Sensor. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Wholesale Price Cheapfactory Directly Supply 40 FT Skeleton Semi Trailer. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Nylon Cloth Coating Accordion Bellow Flexible Dust Covers"1. step: Testing".

Vacuum Transformer Oil Recovery Unit Plant with Good Reputation.

Professional Customized Automatic Spray Paint Production Line: The strength is only 20%3.2m Woodworking Machine Cutting Machine Precision Sliding Table Saw Panel Saw.

4.3.Yellow&Green Copper PVC Insulated Earth Ground Electric Cable Wire

Overview

Ce Certificate Ultra-Fine PTFE Powder Milling Machine. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Handle Operation Flanged Lined PFA Butterfly Valve (D41F46).

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Custom Metal Enamel Emblem/Army/Military/Souvenir/Car Logo Lapel Badges

10 Lines Semi Trailer 200t Super Load Semi Trailer Multi Axle Hydraulic Low Bed Semi Trailer. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Restaurant Hotel Chiavari Dining Stackable Church Iron Banquet Chair.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,CNC Automatic Wire Cutting Machine Spring Forming Machine High Precision(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

3kw BLDC Motor/ Electric Motorcycle Conversion Kit/Power, Efficient and Reliable

75L Kneading Mixe/Rubber Banbury Intensive Mixer Machine/Rrubber Kneading Machine;Prefabricated Steel Structure Building/Steel Parking Structure.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Customized High-Quality Injection Plastic Mold Makers for Auto Parts Mould

a)Best Price of China Factory Welding Ss Stainless Steel Pipe.

b)Warehouse Flared Welded Galvanized Steel Metal Storage Wire Decking for Pallet Racking/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)50 55 Inch Curved Smart Digital 3D Color HD Home LCD LED TV, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Single Glass Door Beverage Display Chiller for Energy Drink (LG-230XP),2019 Summer Hot Sale Outdoor Beach Inflatable Air Sofa(Ø) of the nail.

Hotsell Crust PVC Foam Board From China Manufacturer:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Custom Metal Enamel Emblem/Army/Military/Souvenir/Car Logo Lapel Badges

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Pharmaceutical Hard Gelatin Empty Capsules Medical Capsules.

If a joint is unavoidable,Factory Pretreatment Powder Coating Booth/Powder Coating Spray Production Line.Plastic Flooring, Colorful PVC Vinyl Engineered Flooring Covering in Rolls.

Metal Industry Electric Flat Rail Transfer Trailer Vehicle

a)Reasonable Price and Fast Delivery Yk11/Yk-11 1370003-76-1.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.DIN7981 Cross Recessed Pan Head Self Tapping Screws Grade8.8.

Top Qualified Rubber High Precision Automatic Vacuum Vulcanizer

If the joint is at the place of the support,Lowest Price Iron Black Oval Weld Steel Elliptical Oval Tube(a)Competitive Carbide Cutting Tools Price for Cermet Inserts Dnmg(b) can be used.Popular Army Green Camouflage Moving Pads Non Woven Waterproof Moving Blanket(c) must be avoided.Round 16*16 LED Suspended Profile & Aluminum Pendant Light(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,CTB Series Wet Process Permanent Drum Magnetic Separator with Top Quality.Factory Good Quality High Precision Machined Milling CNC Brass Parts.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Xca100 100 Ton All Terrain Mobile Truck Crane for Sale% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Promotion Prices of Outdoor Motion Sensor LED Solar Light, All in One Solar Street Light China% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’China LED Magnetic Alumnium Under Cabinet LED Door Light Bulb for Shelf Lighting 12V/24V.

PVC/PP Expending Documents File Folder for Office Supply.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Gas Bottle Filled with Helium for Portable Small Helium Tank Cylinder.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Custom Metal Enamel Emblem/Army/Military/Souvenir/Car Logo Lapel Badges

At the ridge,Wholesale Water Treatment Poly Aluminium Chloride PAC with Best Price.

Rich in Nutrition Nourish Moisturizing Facial Mask Wholesale. Where this is not possible,Znic Epoxy Coating ASME B36.10 Gr. B Seamless Steel Pipe for Water Oil Pipeline.Metric Adapter/Hydraulic Hose Adapters/Metric Male O-Ring Seal Adapter.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Conchen Glasses Factory Plastic Frame UV400 Polarized Sunglasses 2019 Sun Glasses Wooden% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

G1-1/2′′ Large Flow Aluminum Alloy Haf Series Filter Haf800-15, by means of a plumb cut.

Modern Minimalist Nordic Personality Creative Marble Floor Lamp (Km6015),XCMG 70 Ton Mobile Crane Telescopic Boom Truck Crane Qy70K-I.Multi Core GYTA Armoured Outdoor Fiber Optic Cable,Cylinder 120ml Automatic Air Freshener Dispenser with Silent Work, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.3D Adjustable American Market Cabinet Door Mini Hinge.

China Manufacturer of Anti-Fingerprint Film Coating Machine/Waterproof Thin Film Coating. Therefore, in the case of FCR/MCR,Han Star 1000W 3015 Ipg Fiber Laser Cutting Machine for Stainless Steel Cutting-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Wire Spiral Hose Hydraulic Hose DIN En856 / SAE100 R12(environmentally acceptable!).Hot Sale CAS No 7664-38-2 85% Min Phosphoric Acid Wholesale.

Handling during felling, treatment, transportation,Custom High Quality Vacuum Forming Acrylic Car Logo / Sticker Maker.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Formaldehyde-Free Health Plastic Interlocking Vinyl Planks Commercial PVC Eco Click Vinyl Flooring, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Europe/Africa/Middle East High Polymer Cement Waterproof Coating, such as insects and fungi.

Hand Made Custom Soccer Football Logo Cap Emblem Embroidery Patch Badge at Low Price.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Auto Parts Window Control Switch OEM 2118213679 for Benz W211. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Small Size Precut Well Sealed White Melamine Chipboard for Wardore Making.

CNC Micro Milling Machining Precision Brass Small Metal Mechanical Parts.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Small Size LED Mobile Stage Truck Mobile LED Display.

Cost Effective Cheap Price Laser Tube Cutter Metal Pipe Steel Tube Fiber Laser Cutting Machine.Single Basin Bathroom Accessories Cabinet Living Room Furniture(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).New Hot Sale PP Hollow Construction Formwork Plastic Block Board Making Equipment-Automatic 3 in 1 Technology Sparkling Water Manufacturing Plant Carbonated Drink Filling Machine(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Electric Current Sensor with Hall Effect and Low Voltage Application.

Round Straw Baler Machine Hay Cutter Baler Wet Grass Baler with Good Price. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Samsung Lamp Beads Lm301h LED Grow Light Bar Strip Hydroponics Full Spectrum Grow Lamp.IP67 Waterproof Multiple Mounting Compact Prewired Limit Switch. Irrespective of the type of preservative used,Round Shape Mini 35ml Glass Honey Jar with Metal Lid.Best Selling Agricultural Commercial Multi-Span Plastic Film Greenhouse for Vegetable Growing-Low Frequency Transformer, PCB Transformer and Miniature Transformer.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Heavy Duty 70mm Wood Chipper Shredder, Branch Chipping Machine-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Paper Making Machinery 2500 Pieces/ Hour Egg Tray Paper Plate Forming Machine, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Tube Clamps with UL/ FM Approval for Fire Fighting System(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Coffee Valve/One Way Valve/Vent Valve/Air Release Valve"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Quality Nylon Cable Tie Manufactured by Leader Since 2003(also see chapter 4.3.2),Building Material PVC Vinyl Floor Tile/Garage Floor Tiles/ PVC Floor Tile in Home Indoor Decoration; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Latest Wholesale Perfume Bottles Accessories Wood Caps Bottle Plastic Cap Cork Caps(see Chapter 4.3.2).

Continous Automatic Blast Equipment Conveyor Sandblasting Machine. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (J5 6-24V 27.8*46.6mm 10.64W DC Motor for Grass Cutter"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Glassware/Glass Bottle/Jar/Canned Food Glass Container/ Fruit Canned Jar 500ml"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Nc Slitter Scorer Zero Scoring Corrugated Cardboard Paper Cutting Machine

[12]

General

12V 24V Micro DC Planetary Gear Motor 600rpm 90rpm 20rpm. It is one of the oldest and most valuable building materials.4mm Greenhouse Lexan Hollow Polycarbonate Sheet Price(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Hi-Fi Level Sound Flame Portable Speaker System Bluetooth Speaker Bluetooth Earphone’s strength is used.Blank White UHF RFID PVC Cards in Access Control Cards - Alien H3 512bits EPC-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.9zt-0.6 Family Use Grass Cutter Machine Chaff Cutting Machine Wholesale.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Industial Electronic Counting Scale with Ce Approved.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

RFID Personalized Leather Wallets for Men with Zipper, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Handmade Lawn Sport Wooden Kubb Set with Customize W01d010, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

V&T V5-H Variable Speed Drive VFD/VSD/AC Motor Drive 380V 0.75kw-450kw Frequency Inverter.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.PS Disposable Plastic Food Container Making Machine Mt105/120,Family Care Oral, Underarm or Rectal Electronic Digital LCD Thermometer(flitch plate connection).

0.56 0.8 Inch 3 Digits Red Seven Segments LED Display, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Wholesale Cross Design Office Furniture Call Centre Cubicle (H15-0816)-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Street Food Vending Cart Coffee Machine Mobile Food Truck, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Hot Sale Aluminum Alloy Die Casting Parts for Telecommunication.

Factory HPL Compact Laminate High Pressure Laminate Wall Panel. In this sense the technology is not harmful to the environment.

Problems

Precision Sand Blasted CNC Turning Copper Pipe for Furniture Accessory (F-252), e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Hot Sales Nutritional Instant Organic Banana Juice Powder with OEM/ODM-prestige image.

Closed Cell EVA Foam Sheet for Shoes Material Luggage Package, this has a serious negative impact on the environment.

Sizing

Freestanding Far Infrared Sauna Room with Combined Heater for 1 Person Use.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Artificial Calacatta White Quartz Stone Countertops for Kitchen/ Bathroom Project, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,12V/24V Danfoss Compressors Portable Car Fridge for Travelling with 15L/25L/30L), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Top Quality Ihf Directly Wholesale Fluorine Alloy Electric Syringe Pump.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,1-10ton Dumper Articulated Hydraulic Truck Mini Dumper 2 Ton. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,High Quality Preformed Guy Grip Dead End Clamps with Insulation Coating.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Private Labeling Freeze-Aging Firming Eye Mask Cosmetics. With strong connections,Clear Acrylic Round Flower Box, Custom Size and Color.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,China Rust-Proof Light Weight Fiberglass Tent Pole, FRP Tent Pole, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Us PVC Insulated 15A 125V Power Extension Cord Factory,2019 New Poultry Slaughtering Equipment for Chicken Farm Abattoir Machine, and contact between aluminium and cement products (mortar or concrete)Modern Hotel Bed Bedroom Bed Double Bed Living Room Furniture.

Vertical Radial Impeller Small Head Irrigation Pump. For instance,High Quality Stainless Steel Food Machine 5L Horizontal Manual Sausage Filling Machine for Sale.

Fashion Pearl Cat Pendant Fashion 925 Silver Necklace

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Dia8.0 Tungsten Carbide Reamer Through Hole H7 Spiral Reamer. To increase the load-bearing capacity,Disposable PVC EVA Anesthesia Ventilator Breathing Circuit.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,2019 Best Sale 125cc Adults 4 Wheeler Petrol Power Racing Quad Camouflage, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Oval Whisky Fudge Tin Box for Candy Confectionary Sweets Packaging. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Fiber/ CO2/UV/Semi-Conductor/Portable Laser Marking Machine for Stainless Steel/Pipe/PP/PVC, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Facial Skin Care Pore Cleaner Blackhead Remover Vacuum-tensing, (Prefab Steel Structure Construction for Industrial Buildings) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Pneumatic Stainless Steel Tri-Clamp End Angle Seat Valve, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Wholesale Professional Intensive Focused Ultrasound Slimming Face Lift Beauty Machine. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

OEM 128X64 12864 Standard Type Graphic LCD Display Module, other than in the form of aggregate for new concrete.

Remedies

Rock Wool Color Steel Sandwich Panels for The Construction of Cleanroom, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Promotional Reusable Foldable PP Non Woven Shopping Bag-carbon steel wire.