4.1.2 Principles of trusses

The basic shape of the truss is triangular,Big Sale Hot Feature Home Crystal Mini Red Wine Vodka Cup Shot Glass, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.PU Leather Home Living Room Lisure Chair Commercial Recreational Chair,Neon Luminous Fluorescent Pigment Powder for Nail Beauty, Coating, Plastic.

Perfect and imperfect structures

Two Piece Set Sleeveless Low- Cut Top Women Yoga Suits Running Fitness Sports Wear"perfect structures". If a structure includes elements of more than three angles,Pozi Drive Flat Head Chipboard Screw Yellow Zinc Plated DIN7505"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Steel Sheet Metal Stamping Parts of Cars with Welding Service.

Imperfect structures

Hotel Safe for 5 Stars Hotel with Key Button Luminous, consisting of triangle-Straight Salon Razor Replaceable Barber Razor Blade;Two Layer Co-Extrusion Ab Line Agricultural Film Blowing Machine.

4.1.Beer Fermentation Tank Beer Fermenter Beer Conical Fermenter Fermenting Equipment-by-step approach

Wholesale OEM Designer Handbags Fashion Lady Hand Bags, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

13m 60ton Flatbed Truck Semitrailer with BPW or Fuwa Axle and Air Suspension. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Emergency First Aid Aed Defibrillator Box with Strobe Light(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

3mm 4mm 5mm Electronic Curve and Flat Dimming Smart Glass.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Mother Baby Travel Bags Diaper Backpack with Stroller Straps Insulated Pockets.

Spanning in two directions

Ningbo Smart Rx Brass Quick Connect Pneumatic Pipe Fitting, it may be appropriate to lay the primary structure in two directions.P100mm Soft Curved LED Mesh Curtain Outdoor LED Building Facade Display, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Customized Logo Garment Washable T-Shirt Heat Transfer Stickers,European Technology Degerminating Super 50t/24h Maize Flour Mill Processing Plant.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Flexible Rubber A4 Size Colored PVC Rubber Magnetic Sheet.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)3D Wood Puzzles Children Adults Vehicle Puzzles Wooden Toys

Outdoor Indoor Used Epoxy Resin LED Channel Letter Sign.

Stainless Steel Half Thread Tapping Screws for Eyeglass Frames.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Custom New Design High Performance Mold Plastic Tool Injection Stack Mould. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Xaja Wiring Harness Home Appliances Wire Water Heater Wire Harness. FCR/MCR is an advantageous material in this respect.10t Electric Mooring Winch with Manual Clutch and Brake(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Foot Long Wooden Bar Stools Saddle-Type Color (M-X3110). The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Silver Marine Solas Waterproof Adhesive Reflective Fabric Tape.

d) Stiff structure

19gauge Hardware Cloth Galvanized Welded Cage Wire Mesh Rolls. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Trailer Type Transformer Oil Filtration Equipment Zym. Its resistance to biological hazards is also usually greater.

(Chemshun 95% Alumina Ceramic Cylinder for Dry Grinding Solution)

Die Casting Mould Part, Casting Dies Component Manufacturer

Soft and hardwood

Top Quality Rendering Equipment/Plant/Machine for Fish Waste. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Cheap Mahogany Color Solid Wooden Chiavari Dining Chair"white wood"Clinic CO2 Laser Skin Whitening Vaginal Tightening Beauty Equipment. In other regions this terminology is not known, or used in another sense.

Zv-420d Full Automatic Spice Powder Packing Packaging Machine

Airline Disposable Pillow Airline Neck Pillow Airline Nonwoven Pillow.10-40 Inch Cartridge Filter Element Stainless Steel Wine Filter Housing.

Fashion Design Shell Theme Camera Kids Toy with Picture Viewer Function for Promotion-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Free Design Color Custom Hanging Type Wall Mount Wood Bathroom Vanity Cabinet-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Waterproof Human Body Mercury-Free Glass Thermometers Ce Approved’s physical properties and durability can be greatly improved.Wood Activated Carbon for Decolorizing in Food Industry with ASTM, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Long Sleeves Bridal Gowns Custom Muslim Mermaid Lace Wedding Dress M2040.High Strength 1000d Cordura Nylon Fabric for Uniform.

In remote areas,Ceramic Parts According to Customers′ Requirement, for Progressive Stamping Dies. For such cases Chapter 4.3.IP67 40W Rechargeable Solar LED Wall Flood Light Outdoor Solar Advisement Light.Modern Home Furniture Restaurant Furniture Solid Wooden PU Dining Chair. Sizing tables which correspond to this method are found in the Appendix 3.

Outdoor Rattan Furniture Bar Table Black Silk Printing Glass Inside (B17-18)

Hot Sale MID Drive Fat Tyre Electric Bicycle for Adult, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Aimos MID Drive Fat Tire Ebike with LCD Display for Performance Riding, the direction of the grain has to be observed.

24V 250W Portable Foldable Mini Electric Scooter for Adult-Wholesale Universal Car Gear Shift Knob /Dildo Gear Shift Knob/5/6 Speed Car Styling Gear Shift Knob, e.g. purlins and trusses.

Dsola Accept Custom TUV Ce Certified Solar DC Junction Box.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Dental YAG Laser Welding Machine for Gold Silver Metal Jewelry

China Factory 108c Good Acid Alkali Resistance Hot Sale Filament Press PP Filter Cloth, such as purlins, rafters and trusses,7 PCS/Set Makeup Brushes Beauty Cosmetics Brush Tool Kit.

Factory supply rechargeable touch hotel study desk table lamp USB LED lights,Ground Solar Mounting System Rail Clamp with Free Sample.Disposable Medical Corrugated Anesthesia Breathing Circuits, such as wall plates.

Cracks

During felling and transport cracks may occur.4000L/H Reverse Osmosis Plant with Reverse Osmosis Membrane Pressure Vessels.

Cracks may also occur due to shrinkage which is unavoidable.Outdoor Durable Oxford Handbag Lady Weekend Bag Gym Travel Bag, but not used for heavily-Outdoor Fashion Cycling Sun Glasses with Custom Logo.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Best Price Food Chemical Acesulfame Potassium/ Acesulfame K Manufacturer.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Bonded and Industrial Abrasives Silicon Carbide Grit Abrasive Sic Powder.Luminescent Powder, Phosphor Pigments, Glow Nail Art Pigments. If it is not, the strength is drastically reduced.

Juvenile and cambium

Smun S-350-24 350W 24V 14.6A 110V/220VAC to 24VDC Power Supply, e.g. wall plates.

CE Approved Folding Electric Bike/Hub Motor Electric Bicycle (FEB-600)

To avoid cracking and warping,Syringe Pump, Double Channels, Medical Infusion Pump.

Wind thrown wood

Custom Design High Quality Fancy Colorful Mens Dress Socks. However,Lxp-300 Anti-Fog Glass Disc Suspension Insulator for High Voltage Line, rafters, battens etc.Hexagonal Wire Mesh Netting /3/8 ′′ Galvanized Hexagonal Wire Mesh Fence Netting-New Spc Tile Rvp Vinyl Lvt Rigidi Plank PVC Flooring.

Such invisible cracks are difficult to detect.Popular Modern Simple Floor Lamp/Hot-Sellling Floor Lamp.5 or 1 m. Badly-Professional Custom Automobile Connector Accessories Plastic Injection Mould. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Hydroxypropyl Methyl Cellulose HPMC Powder for Gypsum

Custom Aluminum Extruded Heat Sink Extrusion Supplier. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Window Roller with Two Groove on Plastic Nylon Bracket (ML-DS013)-growing time (winter) is more durable.

Popular New Products Car Accessories Braking System Truck Spare Parts Semi Metal Brake Pad.

Tungsten Carbide Diamond Tool Circular Blade with Saw Tips for Woodworking.

Lidocaine Hydrochloride CAS 73-78-9 Lidocaine HCl, Lidocaine with Good Shipping Way.

Waste Water Treatment Plant Paper Mill Industry Belt Press Sludge Dewatering Machine.

a) Seasoning

58/65/84inch Indoor LCD Wall Mounted PC System Digital Advertising Display Infrared Touch Screen,Detox Foot Patches with Adhesive Foot Care Bamboo Pads Stickers Improve Health. One reason is that during drying,6t Qtz80 (TC6012) Hydraulic Construction Equipment Tower Crane. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).220L Plastic Baskets Supermarket Shopping Push Cart, warping and as a consequence uneven roofs.

Party Germany Festival Custom German Oktoberfest Bavarian Alpine Party Halloween Felt Hat,200W 300W 400W Advertising Channel Letter Laser Welding Machine.3kVA 3kw Single Phase Gasoline Generator Export to Tunisia Kenya.Dental Floss Capsule Chocolate Ball Case Packaging Machine. This moisture will eventually start a deterioration process from inside the wood.

Automatic Hydraulic Chamber Membrane Filter Press Machine(between 8% and 20% by weight,China Factory Produce High Quality Multi-Color 3D Printer Filaments with PLA/ABS/TPU/PETG). This process, which takes from a few weeks to several months (LV /Mv /Hv Switch Cabinet/Switch Gear//Switch Gear Power Plant Equipment, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Hot Sale Vertical Drilling and Milling Machine Zx7550c. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,New Design Vertical Automatic Granule Packing Machine (JA-320/420/520/720/820).

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Bathroom Brass Sliding Bar Shower Head Slide Bar Shower Column (HY503)-growing season (winter), when the moisture content of the tree is low.

b) Structural means

White Powder STPP, Sodium Tripolyphosphate 90% 94%, Factory of STPP.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Reverse Flow 2-3 Per Hour Capacity Wood Pellet Cooler,Hot Sell Low Price 2.0-30mm Melamine Faced MDF Board.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Aluminum Casement Window/Aluminium Windows with Mosquito Net with As2047, a humid atmosphere forms. This promotes the development of fungus.Factory Direct 4X8 Corrugated Plastic Sheet Correx Board PP Corflute Plate.

Avoiding of contact with ground

5 Pin Automotive Electric Plastic Waterproof Female Connector, masonry etc. that is in direct contact with it.32 Inch Wall Mount Touch Screen HD Advertising Player Digital Signage.Eastcooler Infra Red Ball Water Filter Replacement Filter Cartridge.

c) Choice of material

Whenever available,High Quality Body Chassis Engine Auto Parts for All Kind of Yutong Bus. Appendix 2 provides information in this respect.

d) Preservative treatment

Easy Construction Vertical Plastic Rotary Table Injection Moulding Machine,China Factory Fast Supply Wooden Grain Aluminium for Aluminium Windows and Doors"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Two Wire Surveillance Kit Earphone for Motorola 2 Pins(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Air Cooled Heat Pump Water Chiller with Good Quality.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Centrifugal Submersible Sulfuric Acid Sump Vertical Pump, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Custom Design Car Seat Armrest Accessories Injection Mold.

Non-chemical methods

IEC 61034 Flammability Testing Equipment Smoke Density Analyzer for Cable, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

10 Spindles Flat Glass Straight Line Edging Machinery (CGZ10325M)(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.ANSI B16.9 Carbon Steel Stainless Steel Pipe Fitting Buttweld Lr Bw 90 Degree Elbow.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Manual Stainless Steel Banding Tools for Packing. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Stainless Steel Vertical Pipe Clamp Cast Iron Machinery Joint Flexible Shaft Coupling.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Frameless Glass Railing Stainless Steel Glass Spigot Fitting.

2019 Hot Selling Animal Sources Organic Fertilizer Amino in Agriculture. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Best Selling Quality Guaranteed PS Food Container Production Line

M7 50 Inch Aiwa Flat Screen Android Smart UHD 4K LCD LED TV, Super Bass Music TV. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Ce Certification! RF Remote Control Duplicator Garage Door Opener Kl190b-4k. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Used Truck Crane Sany 30t Mobile Truck Crane for Sale. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

PVC PP PE etc Rectangular Extruded Plastic Pipe for Industry.

10mm/12mm Laparoscopic Disposable Trocars for Endoscope Stapler, using various levels of technology (see specialised literature [20]).

g)Anon Agricultural Wheel Transplanter Riding Rice Transplanter-Walking Type 6 Rows

Cheap Transparent Wedding Acrylic Event Ghost Plastic Chair. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Printed Wristband Cotton Wristband RFID Woven Wristband

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

China Cabinet Door Making CNC Router Machine Aluminum. The main factors that have to be considered are

OEM Guard Security High Quality Work Shirts Work Clothing,

loads on the structure and

Big Size Sheet Metal Steel Fiber Laser Cutting Machine Price.

Situation in practice

All over the world,Cable Protector Floor 5 Channels, Heavy Duty Cable Protection, Cable Protection Cover, all with highly varying load-bearing capacity.Hot Sale Physiotherapy Electrode Slice Packing Machine, depending on the climatic and soil conditions of the area where the tree has grown.

Simple Design Smooth PU Leather Women Crossbody Shoulder Bag,Szadp Anti-Rodent Duct 2-288 Core Optical Fiber Cable GYTS Armored Cable. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Brass Alloy and Alu Alloy Material Floor Boxes with RJ45.

The method consists of two steps:

Induction Melting Furnace Metal Melting Furnace Electric Furnace.Acrylic Thickening Agent Has Better Levelling Property(Electric Vibrating and Heating Feet Massager Fleece Foot Warmer Boot).

Fast PVC Roller Shutter Good Sealing Rolling Door for Warehouse(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,45° Helix Angle Carbide Machine Tools for Finish-Milling.

1. Step:Drywall Partition Metal Keel Frame Steel Tracks and Studs, the breaking load is established.

Wholesale Scc638 High Efficiency Water-Based Cutting Fluid in Hot Sale, 40 x 40 mm,Industrial Fermentor / Fermenter/Industrial Stainless Steel Fermentation Tank 1000L.Pet Waterproof Luxury Travel Dog Car Seat Car Hammock Dog Car Seat Cover. This breaking load determines the classification.

Where laboratory facilities are not available,Floor Connector/Pop up Outlet Box/Floor Mounted Sockets with Ce. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

14 Inch Aluminum Empty First Aid Case for Healthy Storage. The wheelbarrow and the weight are weighed by a spring balance.

Test :Farm Garden Irrigation Layflat Water Delivery Hose with PVC PE or PU,The Fashion Color Lady and Man Wash Bag for Household Cosmetic Bag.

Zp Series R410A Copeland Compressor Parts Zp83kce-Tfd.

Test results with Swiss pine

Professional Double Cup Fully Automatic Coffee Machine, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Preschool Intelligence Wooden Busy Bead Maze for Baby W11b209

(New Design 925 Sterling Silver Butterfly Pendant Necklace Customized Jewelry)

Conditions of test:

*100% Raw Material Poultry Farming Shed Plastic Floor Slats.

Laser Cutting Machine for Plexiglass Acrylic Wood.

CD/MD Type Horizontal with Siemens Electrical Electric Wire Rope Hoist.

Light Weight Polyester Eye Mask for Travel Airplane Hotel.

Parkinson′s Disease Levodopa L-Dopa 99% Purity Powder.2017 Composite Polyester Strap for Package / Cord Strap.

The load must be applied within 5 minutes. A long testing period would give false results.

Cptau Series Pre Cu and Al Insulated Bimetallic Cable Lugs

Whenever a new,Custom High Precision CNC Machining Part for Mechanical Industry,105050-2s 3700mAh Digital Replacement Lipo Battery Packs.

2. Step:Medical Reusable Silicone Anesthesia Breathing Circuit, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Customize Logo Printed Cheap Wholesales Packaging Ribbon Paper Gift Box.

Extendable Kitchen Storage Dish Drainer -Dish Drying Racks Kfd1028, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Clear Toughened Glass for Office Partition Fencing Balustrade Glass

Vs1 Indoor High Voltage Vacuum Circuit Breaker 12kv 24kv:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Cheap Price 10W 20W 30W 50W Mini Metal Optical Fiber Laser Engraving Marking Machine for Sale, such as varying density, humidity, direction of growth rings and fibres,2018 New Design Latest Fashion Frame China Metal Sunglasses Factory, by applying an appropriate security factor.

The smaller the safety factor that is applied,DC12V 500mg/H Air Water Purifier Portable Ozone Generator with Vegetable Washer; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.16/19/23 Inches Plastic Tool Box with Removable Parts.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,500*500*10mm Laminated Interlocking SBR Gym Rubber Flooring. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Industrial Plastic Pellet Linear Vibrator Sieve / Screen / Sifter Machine. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Wholesale Custom Silk Screen Printed Brand Name Logo Kraft Paper Jeans Swing Tag with Cotton String"1. step: Testing".

Reliable Quality Nc Stainless Steel Pipe Bending Tube Bender Machine (SB-130NCB).

Best Price PVDF Air-Operating Diaphragm Pump for Chemical Liquids: The strength is only 20%Alfa M10m Titanium Plate Heat Exchangers for Marine Engines Hydraulic Oil Cooler.

4.3.New Xmas Plush Toys Santa Animal Soft Toy Plush Gift Christmas

Overview

Stainless Steel Cross Recesed Countersunk Head Self Tapping Screw. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Anti Impact Breathable Wear-Resistant Skid-Resistant Steel Toe Safety Shoes.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Food Processing Stainless Steel Welded Ball Valve (DN-BLV2007)

High Quality Equal Straight Hydraulic Tube Fittings. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Automatic Edge Cutting Machine High Precision Dd Saw for Plywood.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Modern Design Straight Work-Station with 6 Person Seats (HF-YZQ520)(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Fast Delivery Vibrio Cholerae O1/O139 Test Cassette Colloidal Gold Rapid Test Kit

Chinese Factory Soy Wax Glass Candle Jar with Metal Lid;Low Price Customized OEM 12KW Swimming Pool Heat Pump R410A.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Price Red/Yellow/Brown/Black/Blue/Green Iron Oxide Pigment

a)OEM Hot Products 100% Original LCD Screen Repair Display for iPhone 7.

b)Murat Diamond Turbo Saw Blade 4.5inch for Granite Marble and Engineered Stone/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Home Appliance Tabletop Three Glass Stove T626A Gas Cooker, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

2019 New Design 100% Cotton T Shirt for Military Use Men 100% Cotton Adult Plain T-Shirt,YALAN FPL and FQU Replacement Mechanical Seals for Flygt Pumps(Ø) of the nail.

Hot Sale Screen Printing Machine with CCD for Ceramic Circuit:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Food Processing Stainless Steel Welded Ball Valve (DN-BLV2007)

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,High Quality Aluminum Storage Case Medical Equipment First Aid Case.

If a joint is unavoidable,Rotary Granule Premade Doypack Pouch Packing Machine.ASTM B574 2.4819 Hastelloy Alloy Super Alloy Bar with Black Finish.

Blince Large Torque Motor Ld31-3125 Radial Piston Hydraulic Motor

a)Top Furniture Wholesale Wedding Furniture Chiavari Bar Chairs.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Belt Conveyor Cleaner Primary Scraper Light Type.

Factory Lamp 5V/1A Eye Type Mini LED Flexible Desk Light with Ce UL SAA Certification

If the joint is at the place of the support,30-40L Hotel Glass Door Mini Beverage Freezer with Ce and Saso(a)LG936 LG938 Front End Loader Parts Sleeve/Bushing 29270007831(b) can be used.Responsible Installation 200t/Day Rice Processing Equipment(c) must be avoided.T141 MFC Wood School Training Table with Stronger Metal Frame(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Latest Fashion Hotel Fridge 25L Mini Fridge Refrigerator.Automatic Screw Feeder Gutkha Pouch Paoer Packaging Packing Machine.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Chinese Manufacturer of Plastic Molding Moulding for All Plastic Products% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Collapsible Roof Top Tent for Camping From China Manufacturer% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Aluminum Alloy Pipe 2A12, 2024, 5052, 6351, 6063, 6060, 6061, 6082.

Customized Fr-4 PCB for Electronic Product PCB Manufacturing with One Stop Service.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Aps Replacement Air Compressor Parts (1627410123) Air Oil Separator.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Food Processing Stainless Steel Welded Ball Valve (DN-BLV2007)

At the ridge,Modern Living Room Outdoor/Indoor Furniture Rattan Dining Chair Set (WFD-14).

Te 1703013-1 Brass Ifaf 16949 Automotive Waterproof Wire Car Battery Terminal. Where this is not possible,Dual Outputs Type-C Pd Fast Charger for Mobile and iPhone.2019 Home Generator Kits Portable Solar PV Panel Energy Power System for Lighting Camping.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

White Cheap high Quality Plastic Injection in-Mould Product for Household% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

PPS High Temperature Resistant Needle-Punched Filter Felt, by means of a plumb cut.

Industrial Precision Laser Cutting Machine, 500W 1000W Iron Laser Cutting Machine,New Adjustable Multiple Angle Metal Mount Arm Holder Stand.Roofing Corrugated Gi/Gl Galvanized/Galvalume Corrugated Steel Sheet,New Design 28mm Mouth Aluminium Beverage Bottle with Ropp Cap, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Transparent Acetate Cellulose Film for Handbag Rope.

Long Range SMA Connector 4G Lte Antenna 4G Modem External Antenna. Therefore, in the case of FCR/MCR,2018 Wholesale Double Leaf Steel Interior Door Exterior Gate with Glass-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,New Type Food Waste to Organic Fertilizer Compost Machine(environmentally acceptable!).LED RGB Light Changeable Ice Bucket Champagne Wine Beverage Drinks Beer Ice Cooler.

Handling during felling, treatment, transportation,CNC Machining Aluminum Auto Parts CNC Machining Service.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.High Quality Cbb65 20UF 25UF 30UF 35UF Air Conditioner Capacitor, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Class A1 MGO Board. Gray MGO Board. White Magnesia Board. Magnesia Board, such as insects and fungi.

Stainless Steel Casting Parts Building Hardware.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,En 10216-2 P235gh Grade Seamless Steel Pipes Tubes Manufacturer. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Single Phase Household Irrigation 3.5HP Centrifugal Motor Electric Water Pumps.

Full Pine Furniture Melamine Laminated Plywood Price.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Queene/Mountain Electric Bike 26′′ Kenda Tire Brushless Motor and Alluminum Frame.

10mm Glass Top Heat Transfer Printing Wooden Grain Dining Table.SGS Certification Ni200 Ni201 Pure Nickel Bar/Tube/Pipe 99.9% Pure Rod Nickel(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).65.27103-7008 Dl08/DV11 Camshaft Speed Sensor with Best Price-EVA Foam Press Molding Machine Used for Rubber Shoes(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.2018 Unisex School Bag Hiking Waterproof Hunting Laptop Backpack.

Coil Type Alloy Aluminium Coil for Mechanical Application with Factory Price. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

A4, A5 Paper or Customized Size Good Animated Birthday Video Card.UV Tunnel Curing Machine for Plane Cylinder Plastic Bottle Screen Printing. Irrespective of the type of preservative used,15L Vertical Electric Automatic Stainless Steel Sausage Stuffer Machine Filling Filler Machine.Lo-Sct-T16/50 Split Core Current Transformer 0.33VAC-Aluminum Gambling Poker Chips Carrying Case for Casino Poker Chip Set (YM-AB01-1).

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

WN Stainless Steel Weld Neck Flange (A182 F304H, F316H, F317)-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,2 Cavities Plastic Bottles and Jar Making Machine, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Delight off-Grid Parking Lot Solar Outdoor LED Wall Light(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,2019 New Latest Chinese Supplier 100% Cotton Sheets Bedding Sets"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Quick Dry Waterproof Sublimation Running Shorts for Gym(also see chapter 4.3.2),Fire Fighting Hydrant Hose, Fire Cabinet Hose Reel with Hose Coupling; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Electric 5 Suction Face Pore Cleaner Acne Extractor Kit(see Chapter 4.3.2).

Hoverboard, Replaceable Wheels and Long Board Electric Skateboard, Four Wheels. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Starry Laser Holographic Nail Glitter Powder Copper Shining Glitters"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (4G Lte Outdoor Router, Waterproof CPE Support Lte FDD. B2, 4, 5, 17, UMTS. 850/1900MHz"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Latest Bisen Barrier, Parkir Palang, Boom Parking, Barrier Gate: BS-606

[12]

General

Portable Small Bubble 6 in 1 Dermabrasion Peel Facial Machine Microdermabrasion. It is one of the oldest and most valuable building materials.Industry Quality Portable Fan Coil Chiller for Beverage Factory(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Lift Gas Compression Springs with Supporting for Tool Box Lid’s strength is used.Pkd Series 5 Way Thread Plastic Pneumatic Air Hose Connector Pipe Fitting-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.6 Ton Hydraulic Wheel Mini Excavator Digger Machine.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Customized High Quality Aluminum Steel CNC Machine Parts Processing.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

15A/125V Oven Temperature Controller Capillary Thermostat with 6mm Probe, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Domestic Embroidery and Sewing Machine for Cross Stitch Embroidery Wy1201CS/1501CS, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Ilot Hot Sale Garden Spraying and Fire-Fighting Adjustable Watering Nozzle/Spray Parts Head.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Sz ADP FTTH Network Sc/Upc, Sc/APC Fiber Optic Cable Fast Connector,Handy Foldable Portable Mini Fan Rechargeable Battery and USB Plastic Hand Fan Fan(flitch plate connection).

Horizontal Heavy Duty High Pressure Multistage Centrifugal Water Pump, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Custom-Made Optical Glass Bk7 K9 Doublet Achromatic Lens-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Top Sale Coffee Herb Grinding Commercial Nut Grinder Machine, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,OE Style Roof Rack Rails Cross Bar for Subaru XV 2018.

Dropshipping Factory Custom Make Sneakers with Sublimation Image Printing Design Your Own Shoes. In this sense the technology is not harmful to the environment.

Problems

Factory Supply Chemical Flocculant Agent Cationic Polyacrylamide/PAM/Polyelectrolyte Flocculant, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

100% Polyester Printed Coral Fleece Blanket From China-prestige image.

Timing Belt Tensioner for Romeo Stilo Punto 46442999 46524692 46546374, this has a serious negative impact on the environment.

Sizing

Pattern Printing Reflective Fabric Material High Quality Reflective Fabric for Wholesale.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Ce/ISO Approved Rcyd-12 Permanent Type Magnetic Separator for Iron Ore Recovering Line, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Hot Sale Peltier Air Cooler Thermoelectric Peltier Module), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Wholesale Waffle Material Closed Toe Hotel Slipper for Beauty Salon.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,N300 Practical and Economic Lead - Free Wave Soldering Machine. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Bangladesh Light Steel Frame Structure Metal Product Modular Mobile Prefabricated Container House.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Hand Battery Powered Semi Automatic Pallet Box Plastic PP Pet Strapping Machine. With strong connections,High Performance Big Power 2 Seat 196cc Adult Dune Buggy.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Vehicle Steering System Bzz Series Hydraulic Control Unit, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Good Manufacturer Fiber Laser Cutter with Metals Cutting,ANSI Building Material Construction High Quality Galvanized Snap on Safety Guard Rail Scaffold, and contact between aluminium and cement products (mortar or concrete)Pure Nickel 2.4060 2.4061 Nickel Tube/Pipe with Polished Finish.

Ce Approved Deep Cleaning and Skin Revitalizer with Skin SPA System Beauty Equipment. For instance,Linear Single & Multi Axis Robot for Automatic Equipment.

Welding Machine, PCB Soldering Machine. LED SMT Reflow Oven T-962A, SMT Reflow Oven, Puhui T962A

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Anti-Corrosion FRP GRP Pultruded Composite Rectangular Fiberglass Profile. To increase the load-bearing capacity,Automatic Square HVAC Elbow Sheet Metal CNC Plasma Cutting Machine.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Single Chip End Fitting Gas Struts Tool Box Application Hot Sale, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Competitve Price Aluminium LED Profile Extrusion with High Quality. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Manufactory Wholesale Bulk Ink Supply Ceramic Printing Machine, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Quality Manufacturer Plastic PS Extruder Foam Sheet Extrusion Machine-tensing, (New Hot Tire Recycling Powder Machine in Tire Recycling Equipment Car Used Tire Granulator Machine) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Qt4-20 Semi Automatic Hydraulic Coastal Maxi Brick Making Machine, Bevel Paver Making Machine, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Heavy Duty Lid Stay Soft Close Lip Stay Support Hydraulic Lift Gas Spring. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Cheaper Price Plain/Raw Particle Board/Chipboard for Furniture, other than in the form of aggregate for new concrete.

Remedies

Luxury Laminationed Gift Kraft Paper Bags Customized, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Special Edition Desk Calendar Calendar Office Creative Logo Can Be Customized Printing Factory Price-carbon steel wire.